International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Zirconium Oxide Oxygen Analysers: WDG-V, WDG In Situ, TM2000 and PreMix 2000 Ranges

Oxygen analysers using a zirconium oxide cell, covering combustion control on boilers, kilns and fired heaters as well as trace O2 in process and inert gases. Readings run from percentage levels down to parts per million, in probe-mounted in situ or extractive formats.

Measuring principle
Zirconium oxide cell
Measurement levels
Percent or ppm O2
Formats
In situ probes and extractive analysers
Components (WDG-V Blowback)
O2, combustibles CO+H2, hydrocarbons CH4+

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Combustion control is where most of these analysers earn their keep. The WDG-V family reads oxygen, combustibles and hydrocarbons together, which lets the same instrument serve both trim control and burner safety duties. For dusty flue gas there are two routes: the WDG-V HP Series with a close-coupled convective sampling design, and the direct-mounted WDG-V Blowback, which measures O2, combustibles (CO+H2) and hydrocarbons (CH4+) and clears its own sample path with an integrated automatic blowback. A further low-level WDG-V version is matched to continuous catalyst regeneration (CCR) units in refining.

Where the gas is hot and wet, an in situ instrument avoids sample conditioning altogether. The field-serviceable WDG Insitu Probe senses directly in the flue, while the WDG 1200 and 1210 Insitu analysers add precise temperature control of the cell.

Glass is served by two specialist units. CMFA-P2000 is a portable zirconia analyser for pre-combustion checks in container glass plants, and PreMix 2000 is a permanently installed air/fuel ratio analyser for premix burners on glass fibre lines. TM2000 handles trace oxygen and responds quickly to process changes, and a dedicated CEM Oxygen Analyser is available for emissions monitoring systems.

All of these rely on the same zirconium oxide cell, a sensing method proven across industry for fast oxygen readings from percent levels down to ppm. Typical users include power and steam generation, cement and lime kilns, glass, metals, refining, natural gas, pulp and paper and industrial gas producers.

Technical specifications

Measuring principleZirconium oxide cell
Measurement levelsPercent or ppm O2
FormatsIn situ probes and extractive analysers
Components (WDG-V Blowback)O2, combustibles CO+H2, hydrocarbons CH4+
Combustion analysersWDG-V Combustion, WDG-V HP Series, WDG-V Blowback
In situ probesWDG Insitu Probe, WDG 1200, WDG 1210
Trace O2TM2000
Portable unitCMFA-P2000
Air / fuel ratioPreMix 2000
Emissions monitoringCEM Oxygen Analyser

Request a price and lead time

Zirconium Oxide Oxygen Analysers: WDG-V, WDG In Situ, TM2000 and PreMix 2000 Ranges. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What oxygen range does the line cover?

From percentage levels in flue gas down to parts per million; TM2000 is the model intended for trace oxygen.

Which model suits flue gas with heavy dust loading?

The WDG-V HP Series with its close-coupled convective design, or the WDG-V Blowback with integrated automatic blowback.

Can any of these measure more than oxygen?

Yes. WDG-V Combustion and WDG-V Blowback also read combustibles (CO+H2) and hydrocarbons (CH4+).

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides