International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Infrared Profiling System TIP900 for Wallboard Production, 20-350 °C, 90° Scan

The TIP900 is a complete system that scans wallboards as they leave the drying oven and detects moisture and density variations inside each board in real time. It combines an infrared scanner, hardware built for harsh conditions and software with a database for records and analysis.

Temperature range
20-350 °C (68-662 °F)
Spectral band
3-5 µm
System accuracy
±2% of measured value or ±2 °C, the greater of the two applies
Repeatability
±1% of measured value or ±1 °C, the greater of the two applies

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Plants install the unit at the dryer exit of a gypsum board line. A scanner moves across the full sheet width while the software reads the temperature map and flags regions where moisture or density has drifted off target. Bubbles, blisters and lumps are picked out as the board passes, and the rejection logic can pull a faulty board from the flow without stopping the run.

The optical head covers 20 to 350 °C in the 3-5 µm window with a 90 degree sweep. Three line-scan modes trade resolution against speed: 256 at 150 Hz, 512 at 76 Hz and 1024 at 36 Hz, all in pixels. Accuracy holds to the larger of ±2% of the reading or ±2 °C, and repeatability to the larger of ±1% or ±1 °C.

Software turns each scan into a quality map for every board and keeps temperature trend graphs alongside an image archive. Recipes are edited with automatic scaling. The operator sets the limits, and the program then issues reject and alarm signals whenever a board crosses them. A dedicated view follows the balance of the dryer profile across its levels, which supports tuning of the oven.

Records go to the LogViewer database, which supports trend review and traceability. Operators can open the data at their own station or from any TIP900 unit connected to the plant network. Process values, defect reports and dryer profiles are passed to HMI and SCADA systems over Ethernet, and a fault identification routine logs each event in the database.

The hardware suits harsh factory floors. Operation is rated from 0 to 50 °C. Shock resistance follows IEC 60068-2-27 along three axes, 5 g for 11 ms and 15 g for 6 ms, while vibration resistance follows IEC 60068-2-6 along three axes between 10 and 150 Hz, with 2 g above 20 Hz in service. Compliance covers the EMC Directive 2004/108/EC and the KCC requirements for Class A industrial equipment.

Technical specifications

Temperature range20-350 °C (68-662 °F)
Spectral band3-5 µm
System accuracy±2% of measured value or ±2 °C, the greater of the two applies
Repeatability±1% of measured value or ±1 °C, the greater of the two applies
Scan angle90°
Scanning resolution256 at 150 Hz; 512 at 76 Hz; 1024 at 36 Hz (pixels)
Ambient temperature0-50 °C (32-122 °F)
ShockIEC 60068-2-27, 3 axes, 5 g for 11 ms, 15 g for 6 ms
VibrationIEC 60068-2-6, 3 axes, 10-150 Hz, 2 g above 20 Hz
CommunicationEthernet, data exchange with HMI/SCADA
DatabaseLogViewer
Compliance2004/108/EC (EMC); KCC, class A

Part numbers

Show all part numbers (1)

TIP900

Request a price and lead time

Infrared Profiling System TIP900 for Wallboard Production, 20-350 °C, 90° Scan. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which defects can the TIP900 detect?

The temperature field reveals moisture and density deviations inside the board, along with bubbles, blisters and clumps. A board with a defect is rejected automatically as it passes.

Can the data be passed to the plant control system?

Yes. Process data, defect reports and dryer profiles go to HMI and SCADA systems over Ethernet, and the history stays in the LogViewer database.

What scan speed does the system offer?

It depends on the resolution selected: 256 at 150 Hz, 512 at 76 Hz and 1024 at 36 Hz, measured in pixels.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides