International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

SPA2 Stand-Alone Alarm Trip Amplifier for Redundant Trip Sources, Dual and Quad Outputs

The SPA2 accepts a signal from a transmitter, temperature sensor or other instrument and provides dual or quad alarm outputs independently of the PLC or DCS. It is installed in the loop as a second, backup trip source to remove the risk of a common-cause failure.

Type
stand-alone alarm trip amplifier
Input
signal from transmitters, temperature sensors and other monitoring and control instruments
Outputs
dual and quad alarm outputs
Configuration
on site or from a PC

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

In many processes the operation of an alarm setpoint is critical. If equipment is not moved to a safe state in time, the result can be costly maintenance, lost production or environmental damage. The commercial exposure in such cases far exceeds the cost of a second trip source, which is why a separate hardware module is added to the loop.

Typical situations that call for a backup trip include a loss of flow when a pump must be stopped to protect it, a final pH correction leaving its specified limits so that effluent has to be diverted, high vibration on a large motor or pump, a rapid rise in reactor temperature, and high pressure approaching the limit where the supply must be shut off.

Where the facility has a PLC or another base process control system (BPCS), it typically performs only one trip. A separate SPA2 module in the same loop provides an independent second trip and prevents a common-cause failure. Where there is no BPCS, stand-alone alarm trip modules take over this task entirely.

Hardwired alarm setpoints complement the PLC, providing redundancy, simple operation and protection of critical parameters. The module is fully independent of the PLC or DCS, so common-cause faults in the control system do not affect it. The SPA2 accepts input from transmitters, temperature sensors and many other measurement and control instruments. It has dual and quad alarm outputs, and it is configured on site or from a PC.

Applications include oil and gas extraction and processing, power generation and transmission, chemicals, microelectronics, pharmaceuticals and biotechnology, pulp and paper, mining and metal refining, water and wastewater treatment, and food and beverage production.

Technical specifications

Typestand-alone alarm trip amplifier
Inputsignal from transmitters, temperature sensors and other monitoring and control instruments
Outputsdual and quad alarm outputs
Configurationon site or from a PC
Purposebackup trip source in the loop
Control system linkfully independent of the PLC or DCS

Part numbers

Show all part numbers (1)

SPA2

Request a price and lead time

SPA2 Stand-Alone Alarm Trip Amplifier for Redundant Trip Sources, Dual and Quad Outputs. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Why use an SPA2 if the PLC already performs the trip?

A PLC or other BPCS usually provides one trip. An SPA2 in the same loop becomes a second, independent source and removes the risk of a common-cause failure.

Which signals can be connected to the module input?

Signals from transmitters, temperature sensors and other monitoring and control instruments.

How many alarm outputs does the module have, and how is it configured?

Versions are available with dual or quad alarm outputs. Configuration is done on site or from a PC.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides