International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

SIY signal isolator and converter, PC programmable, loop-powered, two-wire

The SIY is a two-wire signal isolator and converter that draws its power from the output current loop and is configured from a PC for a standard or custom input range. It builds user curves for non-linear signals and has no open potentiometers.

Type
Signal isolator and converter
Wiring
Two-wire
Power
Loop-powered from the output loop
Configuration
PC programmed, standard and custom input ranges

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The SIY is used on critical measurement loops whose signal has to reach several receivers at once, such as a control system, a backup system, a recorder or an indicator. Pharmaceutical sites are a typical example, where some measuring points are so important that an inaccurate reading can injure personnel, and the signal often feeds several control devices together. Wiring receivers in series within one loop is risky, because a fault or disconnection of any single receiver opens the circuit and sends it into an alarm state. The SIY separates the loops galvanically, so work on the secondary or backup loop does not affect the main control loop, and vice versa.

The instrument is two-wire and draws its power from the output loop, so no separate supply is needed. The input is configured from a PC to almost any signal type and range, standard or special. For non-linear signals, a user conversion curve is stored in the instrument, so the linearisation is performed by the isolator itself rather than by the controller.

The SIY has no open potentiometers. Settings are changed only through the software, so accidental or unauthorised adjustment of the calibration on site is ruled out. This design suits loops in which every change to the settings must be documented.

Apart from the cabinet-mounted version, a field version is available with hazardous area approvals recognised in various countries. Typical sectors are pharmaceuticals and biotechnology, oil and gas extraction, refining, food and beverage, mining and metal processing, power generation, pulp and paper, semiconductor and microelectronics manufacturing, and water supply and wastewater treatment.

Technical specifications

TypeSignal isolator and converter
WiringTwo-wire
PowerLoop-powered from the output loop
ConfigurationPC programmed, standard and custom input ranges
Non-linear signalsUser-defined conversion curves
Adjustment controlsNo open potentiometers
VersionsCabinet mounting; field version with hazardous area approvals
IndustriesPharmaceuticals, oil and gas, food, metals, power, water supply

Part numbers

Show all part numbers (1)

SIY

Request a price and lead time

SIY signal isolator and converter, PC programmable, loop-powered, two-wire. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the SIY need a separate power supply?

No, the isolator is two-wire and is powered from the output current loop.

How is the input range set?

From a PC through the configuration software, to a standard or custom range, and a user curve can be entered for a non-linear signal.

Can the SIY be installed in a hazardous area?

A field version with approvals for hazardous areas recognised in several countries is available for this purpose.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides