
NPT Screw Plug Immersion Heaters with WATROD and FIREBAR Elements, Up to 38 kW
Screw plug immersion heaters thread into a tank, vessel or pipe connection and heat water, oils, solvents and process solutions by direct contact. They are supplied with round WATROD or flat FIREBAR elements, with power up to 38 kW.
- Screw plug sizes
- 1 inch, 1 1/4 inch, 2 inch, 2 1/2 inch NPT
- Heating elements
- WATROD (round), FIREBAR (flat)
- Power
- up to 38 kW
- Watt density
- up to 120 W/in² (18.6 W/cm²)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
These heaters are built for direct immersion heating of liquids in industrial tanks, vessels and pipework. Typical media include deionised, demineralised, clean, potable and process water, industrial rinse tanks, vapour degreasers, hydraulic oil, crude oil, asphalt, lubricating oils, air and gas flows, caustic solutions, chemical baths, glycol antifreeze and paraffin. Application areas cover foodservice equipment, plastics processing, chemical storage, medical and analytical instruments, power generation and semiconductor production.
The heating elements are bent into a hairpin shape and welded or brazed to the screw plug, depending on how well the sheath and plug materials match, which gives a leak-tight joint. Round WATROD elements are re-compacted after bending so that the MgO density, dielectric strength and heat transfer are preserved. Flat FIREBAR elements deliver a high watt density at a lower sheath temperature. Assemblies on the 2 1/2 inch NPT plug carry element supports that hold the correct spacing between the elements.
NPT plugs are offered from 1 inch up to 2 1/2 inch, in four sizes. The 1 and 1 1/4 inch plugs take WATROD elements of 0.260 and 0.315 inch diameter, while the 2 inch and 2 1/2 inch plugs take WATROD elements of 0.430 and 0.475 inch or FIREBAR 1 inch elements. The 1 inch plug is single-phase only, whereas the other sizes can be single or three-phase. For a flanged connection, adapters 125X3SA, 250X3SA, 250X4SA, 250X5SA and 250X6SA convert the screw plug to a 150# steel flange.
Watt density reaches 120 W/in² (18.6 W/cm²) and total output reaches 38 kW. Sheath temperature limits are 870 °C for Alloy 800/840, 650 °C for passivated 316 stainless steel and 304 stainless steel, and 400 °C for carbon steel. WATROD plugs are supplied as standard in 316 stainless steel, steel or brass, while FIREBAR plugs use 304 stainless steel. 304H, 316H, 321, titanium, alloys 400 and 600 and C276 are available on request.
Standard terminal boxes are general purpose, with moisture-resistant or explosion-proof versions as options, and the box can be rotated to suit existing conduit entries. Thermostats, thermocouples and overtemperature protection can be fitted. Built-in thermowells allow the temperature sensor to be replaced without draining the liquid. Components are recognised by UL to 480 V AC and CSA to 600 V AC under files E52951 and 31388. Horizontal mounting and element orientation should follow the manufacturer's instructions.
Technical specifications
| Screw plug sizes | 1 inch, 1 1/4 inch, 2 inch, 2 1/2 inch NPT |
|---|---|
| Heating elements | WATROD (round), FIREBAR (flat) |
| Power | up to 38 kW |
| Watt density | up to 120 W/in² (18.6 W/cm²) |
| Alloy 800/840 sheath | up to 870 °C |
| Stainless steel 316 / 304 sheath | up to 650 °C |
| Steel sheath | up to 400 °C |
| Phases | single-phase on the 1 inch size; single or three-phase on the others |
| WATROD diameter | 0.260, 0.315, 0.430, 0.475 inch |
| Plug materials | 316 stainless steel, steel, brass (WATROD); 304 stainless steel (FIREBAR) |
| Insulation | magnesium oxide (MgO) |
| UL / CSA rating | up to 480 V AC / up to 600 V AC |
| UL / CSA files | E52951 / 31388 |
| Terminal boxes | general purpose; optional moisture-resistant, explosion-proof |
| Options | thermostats, thermocouples, overtemperature protection, built-in thermowells |
Part numbers
Show all part numbers (5)
125X3SA, 250X3SA, 250X4SA, 250X5SA, 250X6SA
Request a price and lead time
NPT Screw Plug Immersion Heaters with WATROD and FIREBAR Elements, Up to 38 kW. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which sheath material should I choose for oils?
For oils and heat transfer fluids, choose a steel sheath up to 400 °C or Alloy 800/840 up to 870 °C. For lubricating oils, select the watt density according to API requirements.
Can the temperature sensor be replaced without draining?
Yes, built-in thermowells allow a sensor to be fitted and replaced without draining the liquid from the tank.
How do I fit the heater to a flanged nozzle?
Use an adapter that converts the screw plug to a 150# flange, for example 250X4SA for a 2 1/2 inch plug and a 4 inch flange.
Similar equipment from other manufacturers






