PST Air Probe Duplex SRFAX200D, Damped Dual Air Temperature Probe, 2 x 2.0 m Lead
The SRFAX200D is a pair of damped air temperature probes with PST thermistor sensors, intended for SRF600 wireless transmitters. Each probe measures from -40 to +70 °C and is fitted with a 2.0 m lead. A 6-pin connector with a locking screw joins both leads to the instrument.
- Sensor type
- PST (thermistor)
- Number of probes
- 2, damped
- Temperature range
- -40 to +70 °C / -40 to +158 °F
- Lead length
- 2 x 2.0 m
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Refrigerator and freezer monitoring is the core job for this probe. Paired with SRF600 wireless transmitters, it lets a single unit watch two points at the same time, such as two chambers or two shelves. Cleanrooms, healthcare, data centres, laboratories and general industry use the same arrangement wherever sample or product temperature must be logged without a break.
Each sensing element is a PST thermistor housed in a small stainless steel stem, 30 mm long and 8 mm in diameter. The stem shields the sensor from mechanical damage and also slows its response on purpose. A bare air probe with low thermal mass reacts to every door opening, so a transmitter would raise alarms that mean nothing. The damped design follows the true temperature of the stored goods instead.
Both probes exit on flat-twin cable insulated in PVA, with each lead running 2.0 m. The two leads come together in one 6-pin connector that locks with a screw, which holds the joint firm and resists liquid ingress better than a push fit. The operating envelope runs from -40 to +70 °C (-40 to +158 °F), so the same probe copes with deep-freeze and ordinary refrigerated conditions.
When installing, position the stem inside the chamber where the reading matters and route the cable out through a door seal or an existing service opening. Plug the connector into the transmitter and tighten the locking screw to complete the connection.
Technical specifications
| Sensor type | PST (thermistor) |
|---|---|
| Number of probes | 2, damped |
| Temperature range | -40 to +70 °C / -40 to +158 °F |
| Lead length | 2 x 2.0 m |
| Wire type | Flat-Twin |
| Lead insulation | PVA |
| Connector | 6-pin, with locking screw |
| Stem length | 30 mm |
| Stem diameter | 8 mm |
| Stem material | stainless steel |
| Compatibility | SRF600 wireless transmitters (SRF 612) |
Part numbers
Show all part numbers (1)
SRFAX200D
Request a price and lead time
PST Air Probe Duplex SRFAX200D, Damped Dual Air Temperature Probe, 2 x 2.0 m Lead. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Why does the probe respond slowly to temperature changes?
The sensor sits inside a 30 mm by 8 mm stainless steel stem that damps its response. As a result, opening a fridge door does not trigger false alarms on the SRF600 transmitter.
How many measuring points does one unit cover?
Two. The SRFAX200D carries two independent probes, each on its own 2.0 m lead, and both leads join one 6-pin connector.
Can the probe be used in freezers?
Yes. The operating range of -40 to +70 °C covers freezers and refrigerators as well as rooms at normal temperature.
Similar equipment from other manufacturers






