International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Insertion cartridge heater MULTICELL, Alloy 800, up to 1120 °C and six zones

The MULTICELL is an insertion cartridge electric heater that transfers heat to the process at sheath temperatures up to 1120 °C. It can be split into as many as six zones, each with its own control, and has a loose fit, which makes it quick to fit and remove.

Type
insertion cartridge heater
Sheath material
Alloy 800
Maximum working temperature
1120 °C (2050 °F)
Maximum watt density
4.6 W/cm2 (30 W/in2)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The MULTICELL heater is fitted into channels of furnaces, dies, platens and process equipment where even heating to high temperatures is required. Listed applications include heat treatment, isothermal forming, hot forging dies, heated platens, superplastic forming with and without diffusion bonding, polysilicon ingot growth, hot gas generation, hazardous waste treatment, soil remediation, NOx control, concentrated solar power, furnaces and drying ovens.

The sheath is Alloy 800. The maximum working temperature is 1120 °C (2050 °F) and the maximum surface watt density is 4.6 W/cm2 (30 W/in2). Sheath diameters are 17.4 mm (0.685 in.) or 23.75 mm (0.935 in.).

Along the length of the heater up to six zones can be set, each controlled independently. This shapes the heating profile along the channel and evens out temperature where heat transfer is uneven. The loose fit in the bore needs no tight pressing, so the heater can be inserted and withdrawn easily when it is replaced.

The minimum bend radius of the leads is 25 mm from the transition between the hot and cold zones. Insulation resistance should be checked with a megger before the first start-up. The heating elements are protected against overheating, and electrical connections are placed in terminal boxes. Installation, orientation, wiring, commissioning, fault finding and planned maintenance are described in the installation and operating manual. The range carries a conformity certificate to Directive 2014/68/EU (PED).

Technical specifications

Typeinsertion cartridge heater
Sheath materialAlloy 800
Maximum working temperature1120 °C (2050 °F)
Maximum watt density4.6 W/cm2 (30 W/in2)
Sheath diameter17.4 mm (0.685 in.); 23.75 mm (0.935 in.)
Number of zonessix zones at most, each with separate control
Minimum bend radius25 mm from the junction of hot and cold zones
Fitloose
ConformityDirective 2014/68/EU (PED)

Request a price and lead time

Insertion cartridge heater MULTICELL, Alloy 800, up to 1120 °C and six zones. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the maximum temperature of the MULTICELL heater?

The maximum working temperature of the Alloy 800 sheath is 1120 °C (2050 °F).

How many heating zones can one heater have?

Up to six zones along its length, each independently controlled. This allows a temperature profile to be set along the channel.

Which sheath diameters are available?

The sheath comes in 17.4 mm (0.685 in.) and 23.75 mm (0.935 in.) diameters. Leads may be bent no tighter than 25 mm measured from the hot to cold transition.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides