International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Model 535 single-loop PID controller, 1/4 DIN, flow control, NEMA 4X front panel

The Model 535 is a 1/4 DIN panel controller for precise and repeatable control of clean water flow and other process media. It performs P, PI or PID control with built-in autotuning, and its front panel is rated NEMA 4X.

Type
Single-loop controller
Case format
1/4 DIN, panel mounting
Front panel protection
NEMA 4X
Control modes
P, PI, PID

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Many industrial sites use large volumes of clean water, and the flow must be measured and regulated because metering, costing and water planning depend on it. For such loops the Model 535 single-loop controller in a 1/4 DIN case is fitted into the control panel. It takes the signal from a flow meter and drives a control valve or pump through its control variable output.

The controller performs proportional, proportional-integral or full PID control. Built-in autotuning sets the loop parameters without manual calculation, while the advanced programming functions allow the algorithm to be adapted to a specific process. The setup and configuration menus are arranged so that commissioning takes little time, even for someone with no previous experience of this instrument.

The front panel carries a large vacuum fluorescent display. The upper line has five digits and shows the main variable, and below it are two alphanumeric lines of nine characters each for parameter names, setpoints and messages. The display stays readable from a distance and in dim operator rooms.

Besides the main CV output, up to three additional relay or analogue outputs can be configured. They serve for alarms on limit values, control of auxiliary equipment, or retransmission of the signal to a supervisory system. The front panel has NEMA 4X protection, so the controller can be installed in panels in wet or contaminated areas. Typical sectors include oil and gas extraction, refining, power generation and transmission, chemical manufacturing, semiconductor production, pharmaceuticals, pulp and paper, mining and metal processing, water treatment and wastewater, food and beverage, and data centres.

Technical specifications

TypeSingle-loop controller
Case format1/4 DIN, panel mounting
Front panel protectionNEMA 4X
Control modesP, PI, PID
AutotuningBuilt in
DisplayVacuum fluorescent; five-digit upper line and two alphanumeric lines of nine characters
Main outputCV (Control Variable)
Additional outputsUp to three, relay or analogue
Typical applicationClean water flow control

Part numbers

Show all part numbers (1)

Model 535

Request a price and lead time

Model 535 single-loop PID controller, 1/4 DIN, flow control, NEMA 4X front panel. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which control modes does the Model 535 support?

It performs P, PI or PID control, and the loop parameters can be set with the built-in autotuning.

How many outputs can be configured?

Besides the main CV output, up to three additional outputs can be set up, either relay or analogue.

Is the controller suitable for panels in damp rooms?

Yes, the front panel is rated NEMA 4X, which suits wet and dirty areas.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides