International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Metric FIREROD cartridge heater, Alloy 800, up to 760 °C and 50 W/cm2

The metric FIREROD cartridge heater uses a swaged design for fitting into bores in moulds, platens and compact equipment housings. It has an Alloy 800 sheath, works up to 760 °C, reaches up to 50 W/cm2 and runs on supplies up to 480 V AC.

Type
metric cartridge heater
Sheath material
Alloy 800
Maximum working temperature
760 °C (1400 °F)
Maximum watt density
50 W/cm2 (330 W/in2)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The metric version of FIREROD is intended for equipment designed in millimetres, where a compact heater, precise temperature control and long service life are needed. Typical uses include plastic moulding machines, heating of dies and platens, sealing bars on packaging machines, heating of chambers in semiconductor equipment, lead connection on wafers and die bonding, and heating of test samples in gas chromatographs.

Other areas include freeze protection and deicing of equipment in cold climates, humidity control, patient comfort heating in medical devices, laboratory equipment, plastics reclamation and food preparation. In fuel cell systems the heaters are used for fuel vaporisation, heating catalytic reactors and air preheating.

The heater has a swaged construction, in which the sheath is crimped after assembly so that the inner elements are compacted and the heat from the heating wire passes evenly into the sheath. This gives a high watt density of up to 50 W/cm2 (330 W/in2), so a small-diameter heater can deliver the required output in a tight assembly.

The sheath is Alloy 800 and the maximum working temperature is 760 °C (1400 °F), with a maximum voltage of 480 V AC. Components in the FIREROD range carry UL, CSA and VDE recognition as components rated to 240 V AC.

When ordering, state the diameter and length in millimetres, wattage, supply voltage, lead type and length, and the working temperature. The heater should be used together with a thermocouple and a controller that holds the part at the set temperature.

Technical specifications

Typemetric cartridge heater
Sheath materialAlloy 800
Maximum working temperature760 °C (1400 °F)
Maximum watt density50 W/cm2 (330 W/in2)
Maximum voltage480 V AC
Constructionswaged
Component recognitionUL, CSA, VDE up to 240 V AC

Request a price and lead time

Metric FIREROD cartridge heater, Alloy 800, up to 760 °C and 50 W/cm2. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the maximum watt density of the heater?

Up to 50 W/cm2 (330 W/in2) with an Alloy 800 sheath.

What temperature and voltage can the heater handle?

The maximum working temperature is 760 °C (1400 °F) and the maximum voltage is 480 V AC.

Where is this cartridge heater used?

In moulds and platens for plastics moulding, sealing bars on packaging machines, semiconductor equipment and gas chromatographs.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides