International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

FLUENT Flow-Through Heater for Liquids and Gases, 250-8000 W, Up to 240 V

A compact flow-through heater with a heating layer applied to the tube, for warming water, process liquids and gases in line. It replaces an immersion heater or a heater wound onto a tube, and operates at pressures up to 150 psi, or 10.2 bar.

Maximum temperature, water
100 °C
Power density, water
70 W/cm2 (450 W/in2)
Maximum temperature, air
350 °C
Power density, air
23 W/cm2 (150 W/in2)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The heater is fitted into the pipework as a self-contained unit of the thermal system. Typical uses include warming liquid for haemodialysis, cooking equipment, heating purge and carrier gases in semiconductor production, preheating ink, on-demand liquid heating, and diluting hydrogenated, corrosive or pyrophoric gases in exhaust streams. A single unit can replace several components and cut the overall footprint.

The resistive circuit is laid on a base tube of grade 444 steel, so the whole tube surface gives up heat and the temperature stays even along it. High power density at low mass gives a fast response and on-demand start-up. Power distribution along the length, or several heating zones, is set by the circuit pattern at manufacture. Fittings and the internal baffle are 316L stainless steel, and the baffle creates turbulent flow. A built-in type K thermocouple measures the heater temperature.

For water the maximum operating temperature is 100 °C at up to 70 W/cm2 (450 W/in2). For air it is 350 °C at up to 23 W/cm2 (150 W/in2). Voltage goes up to 240 V and current up to 15 A per zone, with resistance tolerance of +10% and -5%. The pressure ceiling is 150 psi, which is 10.2 bar. The heaters carry UL/cUL approval and CE marking.

The standard range comes in two diameters. One-inch (25 mm) heaters are made for 120 V at 250 to 1000 W and for 240 V at 500 to 4000 W, with protective tube lengths from 3.00 to 7.75 inches (76 to 197 mm), one or two heating circuits, and 1/4-inch tube fittings. The 1 5/8-inch (41 mm) heaters are rated 1000/4000, 1500/6000 or 2000/8000 W for 120/240 V, with lengths of 6.5, 10 or 12 inches, and either 1/2-inch tube fittings or 1/4 NPT female threads.

For liquid, mount the heater vertically with the inlet at the bottom; for gas, orientation is free. Leads exit axially on a low profile: 20 AWG wire with PTFE insulation to UL 1199 in a 12-inch standard length, and 24 AWG type K thermocouple wire.

Technical specifications

Maximum temperature, water100 °C
Power density, water70 W/cm2 (450 W/in2)
Maximum temperature, air350 °C
Power density, air23 W/cm2 (150 W/in2)
Tube materialgrade 444 steel
Fittings and baffle316L stainless steel
Voltageup to 240 V
Currentup to 15 A per zone
Resistance tolerance+10%, -5%
Maximum pressure150 psi, equal to 10.2 bar
Diameter1 inch (25 mm); 1 5/8 inch (41 mm)
Power250-4000 W (1 inch); up to 2000/8000 W (1 5/8 inch)
Connection1/4-inch or 1/2-inch tube fitting; 1/4 NPT female
Lead wire20 AWG UL 1199, PTFE insulation, 12 inches
Thermocouple24 AWG, type K
CertificationsUL/cUL, CE

Request a price and lead time

FLUENT Flow-Through Heater for Liquids and Gases, 250-8000 W, Up to 240 V. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How should the heater be mounted for liquids?

Vertically, with the inlet at the bottom. For gases the orientation is free.

What is the highest heating temperature?

100 °C for water and 350 °C for air, as measured by the built-in thermocouple, with pressure up to 150 psi (10.2 bar).

Which connections are available?

The 1-inch heaters have 1/4-inch tube fittings, and the 1 5/8-inch heaters take 1/2-inch tube fittings or a 1/4 NPT female thread.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides