
FIREROD 1/2 Inch Cartridge Heater, up to 760 °C and 62 W/cm^2
The FIREROD 1/2 inch (12.6 mm) cartridge heater is inserted into bored holes in metal parts to transfer heat to the part or to the process medium. The Alloy 800 sheath works up to 760 °C and stainless steel up to 538 °C, with power density up to 62 W/cm^2 and voltage up to 480 V.
- Nominal diameter
- 1/2 inch (12.6 mm)
- Sheath length
- 22.2 mm to 1520 mm
- Sheath material
- Alloy 800 or stainless steel
- Maximum temperature (Alloy 800)
- 760 °C
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
FIREROD heaters are inserted into drilled holes in moulds, press platens, heat-sealing bars of packaging machinery, chamber bodies and holders used in semiconductor manufacturing. They are also used to heat samples in gas chromatographs, to protect equipment against freezing and icing, and to maintain humidity or provide warmth in medical devices.
The heater is made by swaging. After assembly the sheath diameter is reduced and the magnesium oxide insulation is compacted, which brings the resistance wire closer to the sheath. Heat transfer from the wire to the sheath improves, so the internal temperature of the heater is lower. As a result fewer heaters, or smaller heaters with higher watt density, can be used. The nichrome resistance wire is precisely wound and centred, so heat spreads evenly along the sheath. The terminal pins are metallurgically joined to the wire. The sheath resists oxidation and corrosion from many chemicals and atmospheres.
For the 1/2 inch diameter two sheath materials are available. Alloy 800 allows a part temperature up to 760 °C and stainless steel up to 538 °C, with a maximum watt density of 62 W/cm^2 in both cases. Sheath length runs from 22.2 mm to 1520 mm. Maximum voltage is 480 V and maximum current is 9.7 A at 240 V, with a wattage tolerance of +5%, -10%. The outside diameter of the locating ring is 16 mm.
A type J (from -20 to 760 °C) or type K (from -20 to 1260 °C) thermocouple can be built in. In Style B the junction touches the inside of the sheath in the unheated zone, while in Style C it is embedded in a special end disc. The thermocouple leads are 250 mm long. Power leads are insulated with silicone under a glass fibre braid, with PTFE, or with mineral insulation in a stainless steel sheath, and lead temperature must not exceed 250 °C. PTFE or mineral-insulated leads allow use in clean rooms.
The heaters are recognised as UL, CSA and VDE components rated at 240 V AC. Size, power, leads and thermocouple are selected for the specific part according to a drawing.
Technical specifications
| Nominal diameter | 1/2 inch (12.6 mm) |
|---|---|
| Sheath length | 22.2 mm to 1520 mm |
| Sheath material | Alloy 800 or stainless steel |
| Maximum temperature (Alloy 800) | 760 °C |
| Maximum temperature (stainless steel) | 538 °C |
| Maximum watt density | 62 W/cm^2 |
| Maximum voltage | 480 V |
| Maximum current at 240 V | 9.7 A |
| Wattage tolerance | +5%, -10% |
| Insulation | compacted magnesium oxide |
| Lead insulation | silicone with glass fibre, PTFE, mineral in sheath |
| Maximum lead temperature | 250 °C |
| Built-in thermocouple | type J or K, Style B or C |
| Thermocouple lead length | 250 mm |
| Locating ring | outside diameter 16 mm |
| Component recognition | UL, CSA, VDE (240 V AC) |
Request a price and lead time
FIREROD 1/2 Inch Cartridge Heater, up to 760 °C and 62 W/cm^2. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which sheath material should be chosen for temperatures above 538 °C?
Alloy 800, which allows a part temperature up to 760 °C. The stainless steel sheath is rated to 538 °C.
Can a thermocouple be built in?
Yes, type J or K. In Style B the junction touches the sheath in the unheated zone, while in Style C it is embedded in the end disc.
What is the maximum current and voltage?
Voltage up to 480 V and current up to 9.7 A at 240 V. As UL, CSA and VDE components, the heaters are recognised for 240 V AC.
Similar equipment from other manufacturers






