International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

1/8-inch FIREROD Cartridge Heater, up to 760 °C and 62 W/cm²

The 1/8-inch FIREROD cartridge heater has a diameter of 3.10 mm and is built to heat parts and process media where space is tight. Its Alloy 600 sheath handles temperatures up to 760 °C and watt densities up to 62 W/cm², with a maximum rating of 744 W at 240 V.

Sheath material
Alloy 600 (standard), 304 stainless steel (option)
Maximum operating temperature
760 °C (1400 °F)
Maximum watt density
62 W/cm² (400 W/in²)
Actual diameter
3.10 mm ±0.05 mm (0.122 in)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The heater is inserted into a bore in a metal part, plate or block where there is little room for a heating element. Miniature cartridge heaters of this kind are used in compact equipment with high packing density, including medical and laboratory apparatus and foodservice equipment.

The element is swaged, with nichrome resistance wire placed close to the sheath and the space between them filled with compacted magnesium oxide (MgO). This insulation has high dielectric strength and carries heat well from the wire to the sheath, so the heater tolerates high watt density and comes up to temperature quickly. The power terminals are metallurgically joined to the wire.

The actual diameter is 3.10 mm ±0.05 mm (0.122 in), and the overall length runs from 22.22 mm to 304.8 mm (0.875 to 12 in). Length tolerance is ±2.4 mm for heaters up to 3.5 in and ±3% for longer units. The maximum voltage is 240 V, the maximum power at 240 V is 744 W, the maximum current is 3.1 A, and the power tolerance is +10% and -15%.

The standard sheath is Alloy 600, with 304 stainless steel available on request. The 760 °C (1400 °F) and 62 W/cm² (400 W/in²) limits apply to the Alloy 600 sheath. Leads are solid as standard and stranded on request, and they can be insulated with fibreglass or PTFE and protected by braid or hose. An internal Type J or K thermocouple with a grounded junction in the end disc can be fitted for control directly from the heater. When ordering, specify length, power, voltage, sheath material, lead type and whether a built-in thermocouple is required.

Technical specifications

Sheath materialAlloy 600 (standard), 304 stainless steel (option)
Maximum operating temperature760 °C (1400 °F)
Maximum watt density62 W/cm² (400 W/in²)
Actual diameter3.10 mm ±0.05 mm (0.122 in)
Minimum overall length22.22 mm (0.875 in)
Maximum overall length304.8 mm (12 in)
Length tolerance up to 3.5 in±2.4 mm
Length tolerance over 3.5 in±3%
Maximum voltage240 V
Maximum power at 240 V744 W
Maximum current3.1 A
Power tolerance+10% / -15%
Leadssolid (standard), stranded (option)
Built-in thermocoupleType J or K, grounded junction in end disc

Request a price and lead time

1/8-inch FIREROD Cartridge Heater, up to 760 °C and 62 W/cm². We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the maximum power of the 1/8-inch heater?

The maximum is 744 W at 240 V, with a maximum current of 3.1 A and a power tolerance of +10% / -15%.

Can a thermocouple be built into the heater?

Yes, an internal Type J or K thermocouple with a grounded junction in the end disc, near the tip, is available.

Which overall lengths are available for the 1/8-inch diameter?

Overall lengths run from 22.22 mm to 304.8 mm (0.875 to 12 in), with a length tolerance of ±2.4 mm up to 3.5 in and ±3% above that.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides