
ASSURANT HT textile heating jacket for gas and exhaust lines, up to 350 °C
ASSURANT HT is a textile heating jacket for gas and exhaust lines in semiconductor equipment. Its recommended working temperature is up to 350 °C, and it can run to 450 °C at most. The jacket helps keep waste gas abatement lines free of blockages and contamination.
- Type
- textile heating jacket
- Recommended working temperature
- up to 350 °C (662 °F)
- Maximum working temperature
- up to 450 °C (842 °F)
- Voltage
- 120, 208 or 240 V standard; others on request
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Process changes in semiconductor tools make blockage in waste gas abatement lines more likely. Deposits are avoided when the line runs hotter, so this jacket raises the temperature of gas and exhaust runs. It serves older tools that already suffer from fouling, as well as new installations that must reach full throughput fast.
Structurally it follows the ASSURANT Type C pattern. A high temperature cloth lies on the inside, PTFE coated cloth forms the outside, and 1 inch of glass cloth insulation sits between them. The thicker insulation means larger shapes can be catered for. Fastening is by a textile hook and loop strip, so the jacket goes on and comes off without tools. Hotter settings draw more power than a standard ASSURANT jacket.
Working temperature is recommended up to 350 °C (662 °F), with an absolute ceiling of 450 °C (842 °F). Standard supply options are 120, 208 or 240 V, and other voltages can be specified. The plug is a standard 4-pin CPC type. A type K thermocouple is an option that can be fitted inside for regulation or cut-off.
Jackets are manufactured for pipe sizes from 1/4 to 8 inches (6.3-203 mm), and other dimensions are arranged on request. The heater suits every current controller in the product range and plugs into existing equipment without changes.
Approvals held are UL, CE and UKCA, and the product conforms to SEMI S2, including limits on surface temperature so the outer face is safe to touch. Typical users are semiconductor tools, abatement systems and gas lines.
Technical specifications
| Type | textile heating jacket |
|---|---|
| Recommended working temperature | up to 350 °C (662 °F) |
| Maximum working temperature | up to 450 °C (842 °F) |
| Voltage | 120, 208 or 240 V standard; others on request |
| Connector | 4-pin CPC |
| Built-in sensor (option) | type K thermocouple |
| Closure | textile hook and loop |
| Inner layer | high temperature cloth |
| Outer layer | PTFE coated cloth |
| Insulation | glass cloth, 1 inch |
| Pipe diameter | 1/4 to 8 inches (6.3-203 mm) |
| Approvals | UL, CE, UKCA, SEMI S2 |
Request a price and lead time
ASSURANT HT textile heating jacket for gas and exhaust lines, up to 350 °C. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the top temperature of the jacket?
The recommended working temperature is up to 350 °C, and the absolute ceiling is 450 °C.
Which pipe diameters can be covered?
Pipes from 1/4 to 8 inches (6.3-203 mm). Other dimensions are arranged on request.
Is a temperature sensor built in?
It is optional. A type K thermocouple can be fitted inside for regulation or cut-off.
Similar equipment from other manufacturers






