
ANSI Flange Immersion Heater, 10 to 14 inch, Sheath Up to 870 °C
The 10 to 14 inch flange heater is an immersion heater with WATROD or FIREBAR tubular elements welded or brazed to an ANSI flange. It heats liquids and gases in tanks and pressure vessels where high power is needed.
- Type
- tubular immersion heater on ANSI flange
- Flange size
- 10 to 14 inch
- Pressure classes
- 150, 300, 600 lb
- Heating elements
- WATROD (round), FIREBAR (flat)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Flange heaters of 10 to 14 inches are fitted into the nozzle of a tank or pressure vessel and are used where heating a liquid or gas needs a large amount of power. The design is simple to install and maintain: the heater is bolted to a matching vessel flange, and the power is connected at a terminal box.
The heating assembly consists of tubular elements welded or brazed to the flange, and there are two element types. WATROD has a round section, with standard sheath materials of Alloy 800/840, passivated 316 stainless steel and steel, and an extended range that includes 304 and 321 stainless steels, titanium, C276, 400 and 600 alloys. FIREBAR has a flat section, which holds more power in a smaller bundle at a lower watt density, making it suitable for oil-based liquids and small tanks with heavy loads. The standard FIREBAR sheath is Alloy 800, with 304 stainless steel available to order.
Maximum operating temperature depends on the sheath material: Alloy 800 up to 870 °C (1600 °F), stainless steel up to 650 °C (1200 °F), and steel up to 400 °C (750 °F). The surface watt density reaches 15.5 W/cm2 (100 W/in2), and combined assemblies can deliver up to three megawatts. Typical supply voltage is 240 to 480 V AC, with a special version for up to 600 V AC.
Flanges are made to ANSI standards for pressure classes 150, 300 and 600 lb. Stock heaters come with a general purpose terminal box. For hazardous areas, versions certified to ATEX Ex eb and IECEx eb are available, and the approvals also cover UL, CSA, PESO and vessels to ASME Section VIII, Div. I. A thermostat can be added to control the process temperature.
Installation and maintenance are covered in a separate instruction for flange and circulation heaters. Flange size, sheath material, power and voltage are matched to the specific vessel and the process medium during selection.
Technical specifications
| Type | tubular immersion heater on ANSI flange |
|---|---|
| Flange size | 10 to 14 inch |
| Pressure classes | 150, 300, 600 lb |
| Heating elements | WATROD (round), FIREBAR (flat) |
| Alloy 800 sheath | up to 870 °C (1600 °F) |
| Stainless steel sheath | up to 650 °C (1200 °F) |
| Steel sheath | up to 400 °C (750 °F) |
| Watt density | up to 15.5 W/cm2 (100 W/in2) |
| Power | up to three megawatts |
| Voltage | 240–480 V AC, special version up to 600 V AC |
| Terminal box | general purpose (standard) |
| Certification | UL, CSA, ATEX Ex eb, IECEx eb, PESO |
Request a price and lead time
ANSI Flange Immersion Heater, 10 to 14 inch, Sheath Up to 870 °C. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which sheath material is needed above 650 °C?
Alloy 800, which works up to 870 °C. Stainless steel is rated to 650 °C and steel to 400 °C.
How does FIREBAR differ from WATROD?
FIREBAR has a flat section and holds more power in a smaller bundle at a lower watt density. It is used for oil-based liquids and small tanks.
Is an explosion-protected version available?
Yes, heaters certified to ATEX Ex eb and IECEx eb are available. The terminal box type is chosen for the installation zone.
Similar equipment from other manufacturers






