International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

6650SP flameproof oil-in-water analyser, UV fluorescence, 0-2500 ppm

The 6650SP measures oil content in water by ultraviolet fluorescence over a range of 0-2500 ppm, with a response time under 1 s. The control unit is housed in a flameproof enclosure marked II 2 G Ex db IIB+H2 T6 Gb.

Measured parameter
oil in water
Method
ultraviolet fluorescence
Range
0–2500 ppm
Response time
< 1 s

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The analyser monitors effluent from refineries, chemical and petrochemical plants, oil fields, and metallurgical, automotive and food plants. On offshore platforms it watches produced water and water used for injection and steam, while onshore it controls the discharge of ballast water. Other duties include return of boiler condensate, feed and cooling water, leak detection, airport drainage, municipal treatment works, process stream control and ship systems where analysis is needed in under 10 seconds.

Measurement uses ultraviolet fluorescence: the probe irradiates the stream and records the light emitted by hydrocarbons. The light source is an LED with a life of up to 6 years. Long-term drift of the output is below 2 % of signal loss per year, and repeatability is 1 % of range. Readings are shown on an LED and vacuum fluorescent display with 3 1/2 digits in user engineering units.

The probe is made from 316SS, super duplex steel, Monel or Hastelloy C. It withstands process temperatures up to 315.5 °C and pressures up to 5000 psig. The control unit measures 314.96 x 414.02 x 279.4 mm, and the analyser has a mass of 27.22 kg. Power is 110/220 VAC at 50/60 Hz, with a consumption of 48 W.

The 4-20 mA output is galvanically isolated. High and low limit alarms and a system fault alarm are routed to configurable Form C relay contacts.

The flameproof 6650SP-XD version holds an EU type examination certificate under Directive 2014/34/EU, complying with EN 60079-0:2012+A11:2013, EN 60079-1:2014 and EN 60079-28:2015, and with IEC 60079-0:2011, IEC 60079-1:2014-06 and IEC 60079-28:2015. The marking is II 2 G Ex db IIB+H2 T6 Gb with an ambient range of -20 to 60 °C. The same certificate covers the 6020 UV analyser, marked Ex db op pr IIB+H2 T4 Gb. Because the enclosure has a viewing window, the instrument should be installed in a zone with low risk of impact. Cable entries, adapters and blanking plugs must be certified to Ex d IIB+H2 Gb.

Technical specifications

Measured parameteroil in water
Methodultraviolet fluorescence
Range0–2500 ppm
Response time< 1 s
Output drift< 2 % signal loss per year
Repeatability1 % of range
Light sourceLED (up to 6 years)
DisplayLED and VFD, 3 1/2 digits
Ambient temperature-20…50 °C
Power110/220 VAC, 50/60 Hz
Power consumption48 W
Analogue output4–20 mA, isolated
Alarmshigh/low limit, system fault, Form C relay
Probe material316SS / SDSS / Monel / Hastelloy C
Process temperature for probeup to 315.5 °C
Pressureup to 5000 psig
Control unit dimensions314.96 x 414.02 x 279.4 mm
Mass27.22 kg
Explosion protectionII 2 G Ex db IIB+H2 T6 Gb

Part numbers

Show all part numbers (2)

6650SP, 6650SP-XD

Request a price and lead time

6650SP flameproof oil-in-water analyser, UV fluorescence, 0-2500 ppm. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the analyser be installed in a hazardous area?

Yes. The II 2 G Ex db IIB+H2 T6 Gb marking is backed by an EU type examination certificate under Directive 2014/34/EU. The ambient range is -20 to 60 °C.

Which probe materials are available?

316SS, super duplex steel, Monel and Hastelloy C. The probe is rated to 315.5 °C process temperature and 5000 psig.

How does the analyser pass data to a control system?

Through an isolated 4-20 mA analogue output. Form C relay contacts with configured limits and a system fault alarm are also provided.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides