International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

6400T and 6400TH UV Fluorescence Sulphur Dioxide (SO2) Analysers, Ranges from 0-50 ppb

Stationary sulphur dioxide analysers that work on ultraviolet fluorescence. The minimum range is 0-50 ppb and the lower detection limit is 0.4 ppb, with zero noise below 0.2 ppb. They hold EPA equivalency for the method and carry the CE mark.

Measuring principle
UV fluorescence
Measured component
SO2
Ranges
0-50 ppb to 0-20,000 ppb, dual and automatic
Units
ppb, ppm, µg/m3, mg/m3

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 6400T and 6400TH measure the concentration of sulphur dioxide in a gas sample and serve ambient air quality monitoring and emissions control. The analyser holds EPA equivalent method status, carries the CE mark, and complies with EN61326-1 and EN61010-1. A single manual with addenda also covers the 6400TU, 6200T and 6200TU variants.

Measurement is based on ultraviolet fluorescence: SO2 molecules are excited by UV radiation and emit light whose intensity is proportional to the concentration. The instrument compensates for temperature and pressure. The sample flow is 650 cm3/min ±10 %, the delay time is 20 seconds, and rise and fall times are below 100 seconds to 95 %.

The user selects the range, from 0-50 ppb up to 0-20,000 ppb full scale, and dual ranges and automatic ranging are supported. Results can be shown in ppb, ppm, µg/m3 or mg/m3. The lower detection limit is 0.4 ppb, accuracy is 0.5 % of reading above 50 ppb, and linearity is 1 % of full scale. Zero and span drift stay below 0.5 ppb over 24 hours and below 1 ppb over 7 days.

Operation is from a graphical interface on a capacitive touch LCD. An internal logger stores data with averaging from 1 minute to 365 days. Calibration is performed in software, and an internal zero and span check is available as an option. The 6400TH can be fitted with a 240 V internal pump. The standard inputs and outputs include up to four analogue outputs (up to three 4-20 mA or 0-10 V, 0-5 V, 0-1 V or 0-0.1 V), Ethernet 10/100Base-T, two RS232 ports and two USB ports, plus eight opto-isolated digital outputs and six opto-isolated digital inputs. An RS485 port, eight 0-10 V analogue inputs and four alarm outputs can be added. The unit runs from 100–120 V or 220–240 V at 50/60 Hz and works between 5 °C and 40 °C.

Technical specifications

Measuring principleUV fluorescence
Measured componentSO2
Ranges0-50 ppb to 0-20,000 ppb, dual and automatic
Unitsppb, ppm, µg/m3, mg/m3
Lower detection limit0.4 ppb
Zero noise< 0.2 ppb (RMS)
Zero drift< 0.5 ppb/24 h, < 1 ppb/7 days
Delay time20 s
Rise and fall time< 100 s to 95 %
Linearity1 % of full scale
Accuracy0.5 % of reading above 50 ppb
Sample flow650 cm3/min ±10 %
Power supply100–120 V, 220–240 V, 50/60 Hz
Analogue outputsup to 4: 4-20 mA or 0-10 V, 0-5 V, 0-1 V, 0-0.1 V
Digital interfacesEthernet 10/100Base-T, 2 x RS232, 2 x USB, RS485 optional
Operating temperature5–40 °C
Dimensions (H x W x D)178 x 432 x 597 mm
Weight16.2 kg

Part numbers

Show all part numbers (2)

6400T, 6400TH

Request a price and lead time

6400T and 6400TH UV Fluorescence Sulphur Dioxide (SO2) Analysers, Ranges from 0-50 ppb. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the lowest SO2 concentration the analyser measures?

The lower detection limit is 0.4 ppb and zero noise is below 0.2 ppb. The smallest range is 0-50 ppb.

Can results be displayed in mg/m3?

Yes. Units are selected from ppb, ppm, µg/m3 and mg/m3. The analyser supports dual ranges and automatic range switching.

How is the analyser connected to a data acquisition system?

Through analogue outputs of 4-20 mA or voltage, Ethernet 10/100Base-T, RS232 and USB, with RS485 optional. It has eight digital outputs and six opto-isolated inputs.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides