International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Calibrated 3 ppmv Moisture Generator for 5800 and 2850 Analysers, 571049901

A calibrated moisture generator with a nominal moisture content of 3 ppmv, part number 571049901. It supplies a gas of known moisture for checking and calibrating trace moisture analysers in the 5800 and 2850 series.

Type
moisture generator
Supplied state
calibrated
Nominal moisture
3 ppmv
Compatibility
5800/2850 analysers

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 571049901 moisture generator is auxiliary equipment for trace moisture analysers in the 5800 and 2850 series. It is used when you need to confirm that an analyser reads correctly at the low end of its range, where the measurement error in moisture in gases is most noticeable. The nominal level of this generator is 3 ppmv.

This item is supplied calibrated, as the product designation GENERATOR MOISTR 3PPM CALIBRTD shows. A calibrated generator provides a reference point against which the analyser reading is compared, and the result of that comparison shows whether the sensor needs adjustment or service. Where analysers form part of a gas quality control loop, this check belongs to routine maintenance.

The generator is matched to the analyser model and its working range. This item is designed for the 5800 and 2850 series, and other moisture levels are covered by generators with a different nominal value. When ordering, quote part number 571049901, the analyser model and, if needed, its serial number to confirm compatibility.

Checks are carried out by the instrumentation team following the analyser manual. The generator is connected to the sample inlet, time is allowed for the readings to stabilise, and the result is recorded in the log. The frequency of checks is set by the equipment owner according to its own procedures and accuracy requirements.

Moisture generators are used in gas drying installations and in high-purity gas lines, where the 5800 and 2850 analysers monitor residual moisture at levels measured in ppmv. A calibrated source made for the analyser removes doubt about whether the reference point matches the characteristics of the sensor.

Technical specifications

Typemoisture generator
Supplied statecalibrated
Nominal moisture3 ppmv
Compatibility5800/2850 analysers
Purposechecking and calibrating moisture analysers
DesignationGENERATOR MOISTR 3PPM CALIBRTD

Part numbers

Show all part numbers (1)

571049901

Request a price and lead time

Calibrated 3 ppmv Moisture Generator for 5800 and 2850 Analysers, 571049901. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which analysers is this generator suitable for?

It is intended for trace moisture analysers in the 5800 and 2850 series, and the analyser model should be quoted when ordering.

What moisture level does the generator give?

Its nominal level is 3 ppmv, and it is supplied calibrated.

Are generators available for other moisture levels?

Yes, the manufacturer makes generators with other nominal values, and part number 571049901 is chosen when a 3 ppmv reference point is needed.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides