International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

MH4 and PH4 Station High Surge Arresters to IEC 60099-4, 36–420 kV Systems

High-voltage substation arresters in the IEC 60099-4 Station High class, covering system voltages from 36 kV to 420 kV. The MH4 line uses a hollow-core porcelain housing and holds IEEE 693 High Performance qualification for seismic sites.

Series
MH4, PH4
IEC 60099-4 class
Station High
System voltage
36–420 kV
MH4 housing
porcelain, hollow core, grey or brown

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Consider MH4036GM030AA, built for a 36 kV system with Ur 30 kV and Uc 24 kV. Its leakage distance is 1116 mm (43.9 in), and the housing withstands 276 kV lightning impulse, 220 kV switching impulse and 108 kV wet at 60 Hz. Residual voltage reads 62.5 kV at 1.5 kA, 70.5 kV at 10 kA and 83.5 kV at 40 kA, while switching protective levels are 59.0 kV at 500 A, 60.5 kV at 1000 A and 62.5 kV at 2000 A.

Installation details are common across the range. Units mount upright on a 254 mm bolt circle with 14 mm holes and suit 48–62 Hz networks. Pressure relief is rated at 63 kA symmetrical rms. On the 36 kV example the line terminal takes Cu or Al conductors from AWG #4 to 500 MCM, minimum strike distance is 445.0 mm, and the sea-level spacing should be at least 131 mm to earth and 165 mm phase to phase. Height is 31.7 in and width and depth 12 in each.

The MH4 housing is porcelain, grey or brown, around a hollow core, and the line has passed IEEE 693 High Performance qualification, which matters for substations in seismic zones. Every unit is routine tested before it leaves the works.

Within one rating several creepage options exist; a 48 kV MH4 comes with either 1116 mm or 1905 mm of leakage distance, so heavily polluted sites can be served without moving up a voltage class. PH4 completes the family for the same 36–420 kV band. Give us the system voltage, Ur and pollution level and we will select the catalogue number.

Technical specifications

SeriesMH4, PH4
IEC 60099-4 classStation High
System voltage36–420 kV
MH4 housingporcelain, hollow core, grey or brown
Seismic qualificationIEEE 693 High Performance
Frequency48–62 Hz
Pressure relief63 kA
Base bolt circle254 mm
Mounting holes14 mm
Ur / Uc (MH4036GM030AA)30 kV / 24 kV
Leakage distance (MH4036GM030AA)1116 mm
Lightning impulse withstand (MH4036GM030AA)276 kV
Residual voltage at 10 kA (MH4036GM030AA)70.5 kV
ConductorsCu/Al, AWG #4–500 MCM

How it compares with similar models

ParameterMH4 and PH4 Station High Surge Arresters to IEC 60099-4, 36–420 kV SystemsEVP Polymer Station Arresters, IEC Station Medium and IEEE Station ClassPDV-65 Optima Normal Duty Distribution Arresters for 2.5–36 kV NetworksIEC 60099-4 distribution surge arresters for 2.5–36 kV networks
System voltage36–420 kV—2.5–36 kV2.5–36 kV
Pressure relief63 kA63 kA15 kA—

Request a price and lead time

MH4 and PH4 Station High Surge Arresters to IEC 60099-4, 36–420 kV Systems. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Is MH4 suitable for a seismic zone?

Yes, the porcelain MH4 carries IEEE 693 High Performance qualification.

Can I get extra creepage without a higher rating?

Yes, for example a 48 kV MH4 is offered with 1116 mm or 1905 mm leakage distance.

What base does the arrester need?

An upright mounting on a 254 mm bolt circle with 14 mm holes.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides