International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Window Coupler UHF Partial Discharge Sensor for Retrofitting Gas Insulated Switchgear (GIS)

The Window Coupler is fixed to the inspection window of gas insulated switchgear and picks up UHF signals from inside the enclosure. It lets monitoring be added to switchgear that is already installed.

Type
Window-mounted partial discharge sensor (coupler)
Application
Gas insulated switchgear (GIS) with inspection windows
Method
Reception of UHF signals from inside the switchgear
Mounting
Over the inspection window

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Partial discharges inside gas insulated switchgear (GIS) often point to developing insulation faults, such as loose particles in a gas compartment, poor contact, contamination or damage to a support insulator. Recording discharges while the equipment is energised makes it possible to find these faults before a breakdown occurs, and repairs can be scheduled without an emergency shutdown.

The Window Coupler is fixed on the outside, over the inspection window of the switchgear, so the gas compartments are never opened and no refilling of the insulating gas is needed. Through the window it picks up the ultra-high frequency (UHF) electromagnetic signals produced inside the enclosure during a discharge. The item belongs to the group of accessories for partial discharge monitoring.

This sensor suits switchgear that is already in service and has no built-in internal sensors. Internal sensors are normally fitted at the factory when the switchgear is assembled, whereas a window sensor can be added later to an operating installation without opening the enclosure. The sensor is not a stand-alone meter. Its signal goes either to a portable instrument for periodic surveys or to a continuous monitoring system, which records, filters and analyses it alongside data from other sensors.

To select the right configuration, the switchgear type and voltage class, the number of bays, the size and position of each inspection window, the enclosure drawings at the mounting point and details of the instrument or system that will receive the signal are needed. The number of sensors follows from the layout, so that every compartment to be monitored is covered.

Technical specifications

TypeWindow-mounted partial discharge sensor (coupler)
ApplicationGas insulated switchgear (GIS) with inspection windows
MethodReception of UHF signals from inside the switchgear
MountingOver the inspection window
PurposeRetrofitting partial discharge monitoring to switchgear
GroupAccessories for partial discharge monitoring

Part numbers

Show all part numbers (1)

Window_Coupler

Request a price and lead time

Window Coupler UHF Partial Discharge Sensor for Retrofitting Gas Insulated Switchgear (GIS). We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Do the gas compartments have to be opened for installation?

No, the sensor is fitted over the inspection window of the switchgear, so the compartments stay closed.

Which switchgear is the sensor suitable for?

Gas-insulated switchgear with inspection windows, including units that are already in service.

Where is the sensor signal sent?

To a portable instrument for periodic surveys or to a continuous partial discharge monitoring system.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides