International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

RFAII-R portable rotor flux analyser for 2 and 4 pole round rotor machines

The RFAII-R detects shorted turns in the rotor winding of turbogenerators and round rotor motors with 2 or 4 poles while the machine is running, without a shutdown. It works with permanently installed TFProbe and FFProbe flux sensors, as well as sensors of other types.

Rotor type
round rotor, 2 or 4 poles
Flux signal range
0.3 V to 48 V
Input impedance of flux channel
10 kΩ
Shaft sync input
1 to 24 V peak

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The insulation between turns of a rotor winding ages over time, and shorted turns appear in generators and synchronous motors. They raise bearing vibration in high-speed machines and can limit the reactive power the machine delivers. If the number of shorted turns grows, the earth insulation of the rotor is probably ageing too, and its breakdown usually ends in an emergency trip. Periodic online monitoring of rotor flux supports planning winding repairs on the basis of condition.

The RFAII-R analyses magnetic flux in the air gap in real time and uses the waveform to locate shorted turns and pole anomalies in any slot, often regardless of generator load at the moment of recording. It is intended for round rotors with 2 or 4 poles, found in turbogenerators and motors with a cylindrical rotor.

Data acquisition is digital, with very high resolution and switched signal attenuation on the board, so the instrument works with flux sensors from any supplier, including older types. For pole identification there is a shaft sync sensor input, and synchronisation is also possible from the mains frequency signal. Fast collection mode builds a results table for each coil at each load point, together with the waveforms. In standalone mode the instrument records data by itself while the generator goes through normal load changes, without a computer connected.

A single measurement lasts 5 s, and the internal memory holds 180 measurements. Waveforms and trends are analysed in the RotorFluxPro software, with data exchanged over USB and Ethernet. An optional mode searches for shorts on a spin test rig while the rotor turns at different speeds.

Power is 115/230 V at 50/60 Hz, with consumption below 100 W. Operating temperature is 0 to 40 °C, storage is -20 to 50 °C, and relative humidity is below 90%, non-condensing. The instrument ships in a transport case measuring 47 x 36 x 18 cm and weighing 7.5 kg. For salient-pole machines the range includes RFAII-S for 4 to 128 poles, while RFAII-RS works with both rotor types.

Technical specifications

Rotor typeround rotor, 2 or 4 poles
Flux signal range0.3 V to 48 V
Input impedance of flux channel10 kΩ
Shaft sync input1 to 24 V peak
External AC sync50 to 237 V AC
Measurement duration5 s
Internal memory180 measurements
InterfacesUSB, Ethernet
Power supply115/230 V, 50/60 Hz
Consumptionbelow 100 W
Operating temperature0 to 40 °C
Storage temperature-20 to 50 °C
Relative humiditybelow 90%, non-condensing
Case47 x 36 x 18 cm, 7.5 kg

Part numbers

Show all part numbers (4)

M1300, M1310, M1320, C0010

Request a price and lead time

RFAII-R portable rotor flux analyser for 2 and 4 pole round rotor machines. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the generator need to be stopped for measurement?

No, the RFAII-R measures rotor flux online while the machine runs and detects shorted turns without a shutdown.

Which flux sensors does the instrument work with?

It works best with permanently installed TFProbe or FFProbe sensors, but its switched attenuation also allows use with sensors of other types, including older ones.

Is RFAII-R suitable for hydro generators?

No, the RFAII-R is for round rotors with 2 or 4 poles; for salient-pole machines the range includes RFAII-S for 4 to 128 poles.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides