
QHS393 Moisture-in-Oil and Temperature Sensor with 4-20 mA and Modbus RTU Outputs
The QHS393 measures water activity and oil temperature continuously and calculates water content in ppm. It works on its own or within a transformer monitoring system, with two 4-20 mA outputs and Modbus RTU over RS485.
- Measured values
- Water activity aw, oil temperature, water content in ppm
- Sensing element
- Capacitive
- Water activity range
- 0 to 1 aw
- aw error at 20°C
- ±0.015 aw (0 to 0.9 aw)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The QHS393 is built for continuous online monitoring of moisture in the oil of power transformers. It measures water activity (aw) and oil temperature (T) and calculates the absolute water content (x) in ppm. The sensor suits all mineral oils and synthetic ester fluids, so it can equally be fitted to transformers filled with ester liquid.
The sensing element is capacitive, with a water activity range of 0 to 1 aw and an error of ±0.015 aw at 20°C within 0 to 0.9 aw. Oil temperature is measured from -40 to +125°C, to ±0.2°C at 20°C in oil. A t90 response time under 60 seconds means changes in moisture content show up online, without taking samples.
Measured values leave on two analogue outputs of 4-20 mA, each freely assignable and scalable to aw, T or ppm, with a maximum load below 500 Ohm. A digital RS485 interface runs Modbus RTU in parallel. The sensor works with the TM1, TM3 and TM8 online dissolved gas monitors, operates standalone within any transformer monitoring system, including 509 ITM and QTMS, and suits the packaged solutions offered by transformer manufacturers.
The body is stainless steel 1.4404 or 316L with IP65 protection, and the sensing element is covered by a stainless steel filter. The process connection is 1/2 NPT and the maximum operating pressure is 10 bar. The electrical connection is an M12 x1 eight-pin plug. The supply is 12 to 36 V DC, drawing no more than 80 mA at 24 V DC. Oil temperature at the point of fitting ranges from -40 to 125°C, while ambient and storage temperatures run from -40 to 80°C. Electromagnetic compatibility follows IEC 61326-1 for industrial environments and IEC 61326-2-3, and product safety follows IEC 61010-1.
Technical specifications
| Measured values | Water activity aw, oil temperature, water content in ppm |
|---|---|
| Sensing element | Capacitive |
| Water activity range | 0 to 1 aw |
| aw error at 20°C | ±0.015 aw (0 to 0.9 aw) |
| Response time t90 | Under 60 s |
| Temperature range | -40 to +125°C |
| Temperature error at 20°C in oil | ±0.2°C |
| Analogue outputs | 2 x 4-20 mA, load under 500 Ohm |
| Digital output | Modbus RTU via RS485 |
| Power supply | 12 to 36 V DC |
| Consumption at 24 V DC | Max. 80 mA |
| Housing and protection | Stainless steel 1.4404 or 316L, IP65 |
| Sensor protection | Stainless steel filter |
| Process connection | 1/2 NPT |
| Electrical connection | M12 x1, 8-pin plug |
| Maximum operating pressure | 10 bar |
| Ambient temperature | -40 to 80°C |
| Compatible liquids | Mineral oils, synthetic ester fluids |
| Standards | IEC 61326-1, IEC 61326-2-3, IEC 61010-1 |
Part numbers
Show all part numbers (1)
OM-Sensor
Request a price and lead time
QHS393 Moisture-in-Oil and Temperature Sensor with 4-20 mA and Modbus RTU Outputs. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Is the sensor suitable for transformers filled with ester fluid?
Yes. The QHS393 is designed for all mineral oils and synthetic ester fluids.
How does the sensor send data to the monitoring system?
Through two 4-20 mA analogue outputs, each assignable to aw, T or ppm, and through RS485 with Modbus RTU.
What installation conditions does the sensor allow?
A maximum operating pressure of 10 bar, oil temperatures from -40 to 125°C, a 1/2 NPT connection and an IP65 housing.
Similar equipment from other manufacturers






