International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

IC44 UHF Partial Discharge Sensor with Dielectric Window

The IC44 mounts on a transformer behind a dielectric window for UHF partial discharge monitoring. It never touches the oil, and it can be fitted at the factory on a new unit or added later on site.

Type
UHF partial discharge sensor
Application
Transformer partial discharge monitoring
Transformer size
Any
Installation
Factory fitting or on-site retrofit

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The IC44 is an ultra-high frequency partial discharge sensor. It picks up the electromagnetic emissions that arise when discharges occur inside the insulation within the transformer tank, and passes the signal to a monitoring system that records and analyses discharge activity. It can be used on transformers of any size.

Partial discharges usually point to local insulation faults such as gas pockets, sharp conductor edges, moisture and contamination. Recording discharges while the transformer is energised shows whether a fault is developing, so maintenance can be scheduled around the actual condition of the unit rather than a fixed calendar.

The sensor's defining feature is its dielectric window, which keeps the device out of contact with the oil altogether. Nothing enters the tank, so the transformer does not need to be opened, the oil is not drained and the insulating liquid stays uncontaminated. That makes the IC44 practical to fit at the factory during manufacture or later on a unit already in service.

The manufacturer advises specifying dielectric windows at the build stage, even where monitoring is not yet planned. Windows fitted at that point allow sensors to be added later at modest cost and without work inside the tank. In practice the sensor serves two situations: a new transformer supplied with online insulation monitoring from its first day, and an existing unit upgraded to watch insulation condition without a long outage. The number and placement of sensors depend on the specific tank and the monitoring system chosen with it.

Technical specifications

TypeUHF partial discharge sensor
ApplicationTransformer partial discharge monitoring
Transformer sizeAny
InstallationFactory fitting or on-site retrofit
Contact with oilNone, non-invasive mounting
Window typeDielectric window

Part numbers

Show all part numbers (1)

IC44

Request a price and lead time

IC44 UHF Partial Discharge Sensor with Dielectric Window. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the oil need to be drained before fitting an IC44?

No. The sensor sits behind a dielectric window and never touches the oil, so the installation is non-invasive.

Can an IC44 be fitted to a transformer that is already running?

Yes. It can be installed at the factory during manufacture or added on site as a retrofit.

What should be specified on a new transformer if monitoring is not yet needed?

The manufacturer recommends fitting dielectric windows at build, so sensors can be added later without entering the tank.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides