International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Internal Coupler, internal partial discharge sensor for GIS switchgear

The Internal Coupler is a sensor fitted inside gas insulated switchgear (GIS) for partial discharge monitoring. Sensors are usually fitted at the factory, and their positions are chosen to cover the whole installation.

Type
internal partial discharge sensor (coupler)
Application
gas insulated switchgear (GIS)
Purpose
partial discharge monitoring
Placement
inside the GIS enclosure

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

To select the right sensors, the switchgear type and voltage class, the number of bays and compartments, drawings of the enclosure at the mounting point, and details of the instrument or system the sensors will connect to are needed. For switchgear already in service, fitting internal sensors should be agreed with the switchgear maker, because the installation requires opening the gas compartments and refilling them with insulating gas.

The sensor sits inside the metal enclosure of the switchgear, so it picks up the signal from a discharge directly from the gas volume of the installation. That signal goes to a measuring instrument for periodic surveys, or to a continuous partial discharge monitoring system, where it is analysed alongside data from other sensors.

Sensors are most often fitted at the factory while the internal compartments of the GIS are still open. Their positions in each compartment are chosen so that a relatively small number of sensors gives effective coverage of the whole installation. The product belongs to the group of partial discharge monitoring accessories. The sensor is not a standalone measuring instrument; it works as part of a measuring chain together with the device or system that records, filters and analyses the discharge signals.

In GIS, partial discharge is often the first sign of an insulation defect, such as free particles in a gas compartment, poor contact, contamination or damage to a support insulator. Recording these discharges under operating voltage allows such defects to be found before breakdown and repairs to be planned without an emergency outage. According to the maker, internal sensors have become the industry standard for partial discharge monitoring in GIS.

Technical specifications

Typeinternal partial discharge sensor (coupler)
Applicationgas insulated switchgear (GIS)
Purposepartial discharge monitoring
Placementinside the GIS enclosure
Installationusually at the factory during GIS assembly
Coveragesensor positions chosen to cover the whole switchgear
Grouppartial discharge monitoring accessories

Part numbers

Show all part numbers (1)

Internal-Coupler

Request a price and lead time

Internal Coupler, internal partial discharge sensor for GIS switchgear. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can internal sensors be fitted to switchgear already in service?

Sensors are usually fitted at the factory during assembly. For switchgear in service, fitting requires opening the gas compartments, so it is agreed with the switchgear maker.

How many sensors does one GIS need?

The number and positions are determined from the drawings of the particular switchgear, so that the sensors cover the whole installation. The scheme and the number of compartments are needed for the calculation.

What is the sensor signal connected to?

To a measuring instrument for periodic surveys, or to a continuous partial discharge monitoring system.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides