
FluxTracII-R 4208 online rotor flux monitor for 2- and 4-pole non-salient rotors
The FluxTracII-R 4208 is a continuous rotor flux monitoring system that detects shorted turns in the windings of 2- and 4-pole non-salient rotors in turbogenerators and motors. It identifies the coil with the short and its severity, and can serve up to 4 machines.
- Type
- continuous online rotor flux monitor
- Rotors
- non-salient, 2 and 4 poles
- Number of machines
- up to 4 (option)
- Compatible sensors
- TFProbe, FFProbe, other flux sensors on the wedge
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Once set up, the system runs without intervention and closes a relay contact when it detects a shorted turn. Its memory holds a baseline measurement, the latest set of readings without an alarm, and the latest set with an alarm. Data is read locally or remotely over USB or Ethernet into the RotorFluxPro program, while the built-in server and Modbus TCP/IP client exchange data with third-party systems. The analysis program reads files from other makers' portable instruments, and the monitor is compatible with the RFAII-R portable instrument.
Any inductive flux sensor signal can be captured and analysed in real time. Compatible sensors include the TFProbe, mounted on a stator tooth, the FFProbe on a slot wedge, and other flux sensors fixed to the wedge. The tooth-mounted sensor can often be installed without withdrawing the rotor. A shaft sync input identifies the slot in which the short has been found.
High-speed, high-resolution data collection allows analysis during normal running and throughout a start or stop of the unit, provided the shaft sync signal is connected. Usually all slots are analysed at constant load, and where needed trends are built at different loads for a more precise forecast of winding condition. Single measurements can be taken, or results can be collected automatically over several days while the generator load changes, without operator involvement.
The FluxTracII-R 4208 is a third-generation system for this kind of monitoring and is applied to turbogenerators, synchronous generators and motors with non-salient rotors. Insulation on such a winding works under strong electrical, mechanical and thermal loads, so shorted turns gradually appear. They cause magnetic imbalance and vibration in the rotor, raise its temperature and accelerate insulation ageing.
For generators with hydrogen cooling, a sealed feed-through kit is available, tested at 2700 kPa (400 PSI).
Technical specifications
| Type | continuous online rotor flux monitor |
|---|---|
| Rotors | non-salient, 2 and 4 poles |
| Number of machines | up to 4 (option) |
| Compatible sensors | TFProbe, FFProbe, other flux sensors on the wedge |
| Sync input | shaft sync sensor |
| Output | relay alarm contact for shorted turns |
| Ports | USB, Ethernet |
| Protocol | Modbus TCP/IP (server and client) |
| Program | RotorFluxPro |
| Measurement memory | baseline measurement, latest sets without alarm and with alarm |
| Compatibility | RFAII-R portable instrument |
| Hydrogen feed-through test | 2700 kPa (400 PSI) |
Request a price and lead time
FluxTracII-R 4208 online rotor flux monitor for 2- and 4-pole non-salient rotors. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can the sensor be fitted without withdrawing the rotor?
The TFProbe is mounted on a stator tooth and can often be installed without withdrawing the rotor.
How many machines can one monitor cover?
Optionally up to 4 machines, with a baseline measurement and the latest sets of readings stored for each.
How does the monitor report a shorted turn?
By closing its alarm relay contact, with data passed on over Modbus TCP/IP, USB or Ethernet.
Similar equipment from other manufacturers






