International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

FFProbe rotor flux sensor for turbogenerators with an air gap of 50 mm or more

The FFProbe is an inductive air gap flux sensor for turbogenerators with an air gap of 50 mm or more. It measures the rate of change of flux across the gap, from which shorted turns in the rotor winding can be identified.

Type
inductive air gap flux sensor
Air gap
50 mm and above
Mounting
on stator wedge, non-metallic pins, rotor withdrawn
Sensor height
made to suit the air gap

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The sensor is supplied as a kit. The M1515 variant suits air-cooled machines with non-salient rotors, and the M1538 variant suits hydrogen-cooled machines, and both are for air gaps of 50 mm or more. The kit includes the sensor with a shielded, heat-resistant twisted pair cable of 15.2 m attached, a fibreglass terminal box measuring 148 x 94 x 151 mm, fixing materials, an earthing cable, epoxy and installation instructions. The M1538 kit also includes an SMA to twisted pair adapter and a small sealed feed-through kit for hydrogen.

The sensor is fitted to the stator wedge with non-metallic pins while the rotor is withdrawn, and its height is made to suit the particular air gap. The design folds down so that the rotor can be passed into the stator bore without damaging the sensor.

The sensor monitors the excitation winding in service, either periodically or continuously. Its signal reflects the rate of change of magnetic flux in the air gap, and the waveform shows whether shorted turns are present in the rotor coils of turbogenerators, synchronous motors and hydrogenerators. FFProbe works with the RFAII portable instrument, with the FluxTracII continuous monitor, or with the GuardII monitor fitted with a flux module.

Machines with gaps under 50 mm, and salient-pole machines, use the other sensor, the TFProbe. Its sensing element is a printed circuit board measuring 12 x 25 x 4 mm, bonded to a stator tooth with epoxy, and in many machines this can be done without withdrawing the rotor.

Technical specifications

Typeinductive air gap flux sensor
Air gap50 mm and above
Mountingon stator wedge, non-metallic pins, rotor withdrawn
Sensor heightmade to suit the air gap
Cableshielded heat-resistant twisted pair, 15.2 m
Terminal boxfibreglass, 148 x 94 x 151 mm
Compatible instrumentsRFAII, FluxTracII, GuardII
M1515 kitair-cooled, non-salient rotor
M1538 kithydrogen-cooled, SMA adapter, sealed feed-through

Part numbers

Show all part numbers (2)

M1515, M1538

Request a price and lead time

FFProbe rotor flux sensor for turbogenerators with an air gap of 50 mm or more. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the FFProbe be fitted without withdrawing the rotor?

No, the FFProbe is mounted on the stator wedge with the rotor withdrawn. For gaps under 50 mm, the TFProbe is often fitted without withdrawing the rotor.

Which kit is needed for a hydrogen-cooled generator?

The M1538 kit, which includes an SMA to twisted pair adapter and a small sealed feed-through kit for hydrogen.

Which instruments does the sensor work with?

The RFAII portable instrument, the FluxTracII continuous monitor, and the GuardII monitor with a flux module.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides