International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

070 pressure and vacuum bleeder with gauge for sealed transformers

The 070 series bleeders hold working pressure in sealed transformers by venting excess pressure and vacuum. Above the set pressure the valve releases gas, and when a vacuum forms it admits air into the tank.

Type
Pressure and vacuum bleeder with gauge
Pressure setting
3 to 12 PSIG (0.21 to 0.83 bar)
Vacuum setting
-3 to -12 PSIG (-0.21 to -0.83 bar)
Repeatability
±0.5 PSI

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Two diaphragms, each backed by its own spring, sit inside the valve body. While pressure stays within the set limits the valve remains closed. When tank pressure rises above the spring setting, the pressure diaphragm overcomes the spring load and gas is vented. Under vacuum, the low pressure acts on the vacuum diaphragm and opens the valve so that air enters the tank. Screens cover the openings to keep out contaminants.

Settings can be adjusted from 3 to 12 PSIG (0.21 to 0.83 bar) for pressure and from -3 to -12 PSIG (-0.21 to -0.83 bar) for vacuum. Repeatability is ±0.5 PSI on both the pressure and the vacuum side. The valves meet ANSI standards for transformers. On nitrogen-blanketed transformers the valve works with the gas space, while on conservators it works with air.

The 070 series is side mounted and can carry a local gauge with a 3.5 in (89 mm) dial, reading -5 to 5 PSI or -10 to 10 PSI. A built-in sampling valve lets gas be drawn for analysis, and the gauge can be fitted together with the valve to simplify installation on the tank. The valve is used on transformers, conservators, on-load tap changers and other sealed electrical equipment at substations, in the power sector and on industrial tanks with a gas space above the liquid.

The body is cast zinc-aluminium alloy with an ANSI #70 powder coat, and the gauge lens is UV-stabilised polycarbonate. Diaphragms are silicone or fluorocarbon rubber. The unit works indoors or outdoors between -40 °C and 70 °C, with gas or air as the medium. The tank connection is 1/4-18 NPT or 1/8-27 NPT, with external or internal thread. The manufacturer lists 97 order codes based on 070-35C and 070-35F.

Technical specifications

TypePressure and vacuum bleeder with gauge
Pressure setting3 to 12 PSIG (0.21 to 0.83 bar)
Vacuum setting-3 to -12 PSIG (-0.21 to -0.83 bar)
Repeatability±0.5 PSI
Gauge scale-5 to 5 PSI or -10 to 10 PSI
Gauge diameter3.5 in (89 mm)
Mountingside mounted (070 series)
Tank connection1/4-18 NPT, 1/8-27 NPT
Bodycast zinc-aluminium alloy, ANSI #70 powder coat
Diaphragmssilicone or fluorocarbon rubber
Working mediumgas or air
Operating temperature-40 °C to 70 °C
Sampling valvebuilt in

Part numbers

Show all part numbers (2)

070-35C, 070-35F

Request a price and lead time

070 pressure and vacuum bleeder with gauge for sealed transformers. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What pressure and vacuum settings can be adjusted?

Pressure can be set from 3 to 12 PSIG (0.21 to 0.83 bar) and vacuum from -3 to -12 PSIG, with repeatability of ±0.5 PSI.

Can gas be sampled without removing the valve?

Yes, the valve has a built-in sampling valve for drawing gas samples for analysis.

Which thread connects the valve to the tank?

It is 1/4-18 NPT or 1/8-27 NPT, with either external or internal thread.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides