International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

038 Gas Accumulation Indicator for Conservator Transformers, 0 to 450 cm³ Scale

The 038 indicator mechanically measures the volume of gas that collects in a transformer with a conservator and gives a signal when the gas displaces more than 200 cm³ of oil. A built-in sampling port allows gas to be taken for laboratory analysis.

Type
Mechanical gas accumulation indicator
Standard scale
0 to 450 cm³
Alarm threshold
More than 200 cm³ of displaced oil
Switch
SPDT, latched signal

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The indicator is fitted to power transformers with a conservator, including high-voltage units rated from 34 kV up to 345 kV or more, at utility and industrial sites. Gas forms inside a transformer during an internal arc or when insulation breaks down, so continuous measurement of the gas volume helps spot damage at an early stage and schedule maintenance according to the actual condition of the unit.

The dial shows the total volume of accumulated gases at all times. A SPDT switch inside the case operates when the gas displaces more than 200 cm³ of oil and switches on a latched alarm signal. The signal stays active until enough gas has been drawn from the collector. The standard scale runs from 0 to 450 cm³.

The 6 inch dial (152.5 mm) is tilted at 15 degrees, so the reading can be seen from ground level beside the base of the transformer. The scale can be customised for a specific application. The case and flange are aluminium with a thermosetting powder finish, the mounting parts, cup and rim are stainless steel, and the window is UV-stabilised polycarbonate. The case is either sealed or vented and meets IP54.

The switch carries 15 A at 125, 250 and 480 V AC on a resistive load, and 1/2 A at 125 V and 1/4 A at 250 V DC. Dielectric strength is 1500 V AC for one minute. The operating range is -40 °C to +80 °C with ambient humidity from 35% to 100%, and the unit weighs 5 kg. It connects to the tank through a 3/8 inch 18 NPT thread and is fixed by two 5/8 inch studs or bolts, 1.5 inch long, on 4.25 inch centres.

Cable entry type, cable type, colour and length are chosen to order. A VLV-602-2 sampling valve kit can be supplied to order; it is mounted at the side of the tank at ground level under a protective cover. A KIT-005-1 syringe kit draws a gas sample of a set volume.

Technical specifications

TypeMechanical gas accumulation indicator
Standard scale0 to 450 cm³
Alarm thresholdMore than 200 cm³ of displaced oil
SwitchSPDT, latched signal
AC switching15 A at 125, 250, 480 V, resistive load
DC switching1/2 A at 125 V; 1/4 A at 250 V, resistive load
Dielectric strength1500 V AC, 1 minute
Dial6 inch (152.5 mm), tilted 15 degrees
CaseSealed or vented, IP54
Tank connection3/8 inch 18 NPT
Mounting2 studs or bolts, 5/8 inch, on 4.25 inch centres
Operating temperature-40 °C to +80 °C
Ambient humidity35% to 100%
Weight5 kg
OptionsVLV-602-2, KIT-005-1

Part numbers

Show all part numbers (11)

038-001-02, 038-002-01, 038-002-02, 038-003-01, 038-003-03, 038-005-01, 038-005-02, 038-008-01, 038-009-01, 038-002-01-S, 038-009-01-S

Request a price and lead time

038 Gas Accumulation Indicator for Conservator Transformers, 0 to 450 cm³ Scale. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

When does the indicator signal contact operate?

The SPDT switch operates when the accumulated gas displaces more than 200 cm³ of oil, and the signal stays latched until gas has been drawn off.

How can a gas sample be taken at ground level?

A VLV-602-2 valve kit is mounted at the side of the tank at ground level and connected to the indicator by a tube.

Which transformers is the indicator intended for?

Power transformers with a conservator, including high-voltage units rated from 34 kV up to 345 kV or more.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides