International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Lorch HandyTIG AC/DC TIG inverters for aluminium and steel, 180 A and 200 A, 230 V

Lorch HandyTIG AC/DC is a range of portable inverters for TIG welding with alternating and direct current, covering aluminium on AC and steel and stainless steel on DC. The HandyTIG 180 AC/DC and HandyTIG 200 AC/DC models run from a 230 V mains supply and suit workshop and site use.

Brand
Lorch
Country of manufacture
Germany
Series
HandyTIG AC/DC
Models
HandyTIG 180 AC/DC ControlPro, HandyTIG 200 AC/DC ControlPro

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Aluminium TIG welding needs alternating current, and because aluminium conducts heat so readily, each extra millimetre of thickness calls for more current. The range therefore has two models: the HandyTIG 180 AC/DC for aluminium up to 5 mm and the HandyTIG 200 AC/DC for aluminium up to 8 mm. Both run from a single-phase 230 V supply, so the machine can go to almost any site.

The HandyTIG 180 AC/DC ControlPro covers 5 to 180 A and delivers 150 A at 60% duty cycle and 40°C, welding steel and stainless steel up to 8 mm and aluminium up to 5 mm, with a Schuko plug. The HandyTIG 200 AC/DC ControlPro covers 3 to 200 A, with 180 A at 60% duty cycle and 40°C, and handles steel and stainless steel up to 10 mm and aluminium up to 8 mm. Both models run from a 230 V socket with a 16 A fuse, over an extension lead of up to 100 m or from a generator.

Operation is straightforward. The operator first chooses the current type, DC for steel or AC for aluminium, then sets the parameters following the Lorch 3 steps to weld concept with built-in automatic parameter selection. The AC waveform is shaped for a stable arc, strong cleaning of the aluminium oxide film and reduced noise. Fully digital control keeps the TIG arc steady even when the mains voltage fluctuates.

Arc starting is contactless with high-frequency ignition, which works reliably on aluminium too, and ContacTIG without HF is available as an alternative. Two-stroke and four-stroke torch modes allow quick tacking and comfortable long seams. Adaptive crater filling can be switched off for tacks, and a second current level can be called from the torch to avoid burning through the joint. Pulse mode, torch remote control, a digital display with one-ampere steps and job memory for two TIG and two electrode settings are also included.

The unit weighs just over 13 kg, and its housing is protected against falls from up to 60 cm. The control panel is shielded by a protective cover, and a built-in dust filter extends service life in dusty fitting environments. Lorch HandyTIG AC/DC is made in Germany. The range suits apparatus construction, sheet metal work at a fixed workstation, repairs, maintenance and final assembly.

Technical specifications

BrandLorch
Country of manufactureGermany
SeriesHandyTIG AC/DC
ModelsHandyTIG 180 AC/DC ControlPro, HandyTIG 200 AC/DC ControlPro
ProcessesTIG AC; TIG DC; electrode welding
Welding current range5-180 A / 3-200 A
Duty cycle 60% at 40°C150 A / 180 A
Aluminium thicknessup to 5 mm / up to 8 mm
Steel and stainless steel thicknessup to 8 mm / up to 10 mm
Mains voltage230 V
Mains fuse16 A
Mains plugSchuko
Extension lead lengthup to 100 m
IgnitionHF contactless; ContacTIG as an alternative
Job memory2 TIG and 2 electrode
Weightjust over 13 kg
Crash protectionup to 60 cm

Request a price and lead time

Lorch HandyTIG AC/DC TIG inverters for aluminium and steel, 180 A and 200 A, 230 V. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What aluminium thickness do the HandyTIG AC/DC units weld?

The HandyTIG 180 AC/DC handles aluminium up to 5 mm and the HandyTIG 200 AC/DC up to 8 mm. For steel and stainless steel the limits are 8 mm and 10 mm.

What power supply is needed?

A single-phase 230 V mains supply with a 16 A fuse. The units can also work over an extension lead of up to 100 m or from a generator.

What current is available at 60% duty cycle?

At 40°C the HandyTIG 180 AC/DC gives 150 A and the HandyTIG 200 AC/DC gives 180 A.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides