
ALFA IN Alfin 220 T PFC TIG and MMA inverter, 5–220 A, 230 V
The Alfin 220 T PFC is a single-phase welding inverter from the Czech maker ALFA IN for TIG and manual metal arc welding. It gives up to 220 A at a 40% duty cycle, a higher sustained current than the smaller Alfin models, and is built for daily shop and site work.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Processes
- TIG, MMA
- Welding current range, A
- 5-220
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
In the single-phase Alfin inverter range the 220 T PFC sits above the Alfin 204 T PFC in terms of load. It gives its maximum 220 A at a 40% duty cycle, 180 A at 60% and 160 A at 100%. The adjustment range runs from 5 to 220 A on a 230 V mains supply, with the mains protection listed as 16 A (25 A in brackets). The unit is heavier than the smaller models at 18 kg. The input power factor corrector (PFC) is shown in the model name.
The Alfin 220 T PFC is an inverter source for MMA, TIG without pulse, pulsed TIG and synergic TIG. In TIG, 2T and 4T modes are available with arc striking by LIFT-ARC contact or by high-frequency HF, plus 4T BI-LEVEL, which switches between two current levels, and 2T SPOT for spot welding, again with or without HF. The pulse is fully adjustable, and synergic pulse reduces the setup to choosing the current. The welder sets current rise and fall, the final current and the post-gas time after the arc is extinguished.
Processes for thin metal are the same as on the larger Alfin models. DYNAMIC ARC adjusts the arc when the torch is pulled away, giving deeper penetration and a steadier arc. Q START makes tacks without discolouration and is used on thin sheet. MULTI-TACK interrupts the current periodically, so the metal melts less and the thinnest sheet welds with little or no distortion. Q-Spot gives precise tacks with low heat input.
For manual arc welding the unit has HOT-START, ARC-FORCE and ANTI-STICK: easier striking, arc stabilisation and current cut-off when the electrode sticks. A microprocessor controls all welding parameters. Individual settings can be stored in memory as 50 user programmes (JOB) for particular parts. The current can be controlled with the UD buttons on the torch, and the manual describes remote control of the welding current.
The unit is designed for heavy working and climatic conditions, and it complies with CE marking requirements. A TIG torch, a foot pedal, a gas hose, an earth cable and a welding trolley are selected to match the Alfin 220 T PFC.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Processes | TIG, MMA |
| Welding current range, A | 5-220 |
| Welding current at 100% duty, A | 160(160) |
| Welding current at 60% duty, A | 180(180) |
| Welding current at 40% duty, A | 40%=220(40%=220) |
| Mains voltage, V | 230 (1x230 V) |
| Mains protection | 16 A (25 A) |
| Programme memory | 50 JOB |
| Weight, kg | 18 |
Part numbers
Show all part numbers (1)
5.0274
Request a price and lead time
ALFA IN Alfin 220 T PFC TIG and MMA inverter, 5–220 A, 230 V. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What duty cycle does the Alfin 220 T PFC have?
220 A at 40% duty, 180 A at 60% and 160 A at 100%.
Which TIG modes are available?
Continuous, pulsed and synergic TIG, in each case 2T and 4T with LIFT-ARC or HF, plus 4T BI-LEVEL and 2T SPOT spot welding.
Can the current be controlled from the torch?
Yes, the unit supports the UD buttons on the torch, and the manual describes remote control of the welding current.
Similar equipment from other manufacturers






