
ALFA IN Alfin 300 AC/DC TIG and MMA inverter, 5–300 A, 400 V
The ALFA IN Alfin 300 AC/DC is a TIG AC/DC and MMA inverter for steel, stainless steel and aluminium. It runs from a 400 V supply, delivers up to 300 A and is aimed at specialist welding workplaces with varied tasks.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Processes
- TIG AC/DC, MMA
- Welding current range, A
- 5-300
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The Alfin 300 AC/DC is the senior unit in the Alfin 200, 221 and 300 AC/DC line, designed for a 400 V mains supply. The welding current range is 5–300 A. The maximum 300 A is reached at a 30% duty cycle, 220 A at 60% and 180 A at 100%. Mains protection is 16 A and the unit weighs 23 kg. AC current is needed for TIG welding of aluminium and DC for steel and stainless steel, so one power source covers all three material groups.
According to the ALFA IN manual, the inverter works in TIG AC, TIG DC and MMA, and the machine is designed mainly for TIG. In TIG, pre-flow and post-flow of shielding gas are available, along with current rise (Slope Up) and fall (Slope Down), a final current, high-frequency HF arc striking and 2T and 4T control. The Bilevel function switches between two set currents during welding, and pulse mode has flexible settings for individual parameters.
In DC mode the machine has ALFA IN's own processes. DYNAMIC ARC (DYNarc) changes the arc as the torch is pulled back, giving better penetration and a steadier arc. Q START makes neat tacks without discolouration and suits thin sheet. MULTI-TACK switches the current on and off periodically, so the metal melts less and very thin sheet welds with little or no distortion. Q-Spot makes precise tacks with low heat input.
For arc welding with stick electrodes there are HOT START, ARC FORCE and ANTISTICK. Set values are kept after switch-off, individual settings can be stored as JOB programmes and recalled from memory, and a reset returns the factory settings. The unit carries the CE marking. Where the letter S appears on the rating plate or panel, the unit can be used in rooms with increased risk of electric shock.
The Alfin 300 AC/DC suits workshops that weld aluminium structures, stainless steel vessels and carbon steel on one workplace. A TIG torch, a foot pedal and a trolley for moving the unit around the workshop are selected to match it.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Processes | TIG AC/DC, MMA |
| Welding current range, A | 5-300 |
| Welding current at 100% duty, A | 180 |
| Welding current at 60% duty, A | 220 |
| Welding current at 30% duty, A | 30%=300 |
| Mains voltage, V | 400 |
| Mains protection | 16 A |
| Weight, kg | 23 |
Part numbers
Show all part numbers (1)
5.0275
Request a price and lead time
ALFA IN Alfin 300 AC/DC TIG and MMA inverter, 5–300 A, 400 V. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can the Alfin 300 AC/DC weld aluminium?
Yes, in TIG AC mode. TIG DC is used for steel and stainless steel, and MMA is also available.
What current does the unit deliver during continuous work?
180 A at 100% duty and 220 A at 60%, with a maximum of 300 A at a 30% duty cycle.
What mains supply does it need?
A 400 V mains supply with 16 A protection.
Similar equipment from other manufacturers






