
ALFA IN Alfin 300 T kit with CS cooling unit and trolley, TIG and MMA
In this version the ALFA IN Alfin 300 T is supplied as a ready TIG station: a TIG and MMA inverter, a CS cooling unit and a trolley. A gas hose and an earth cable are included, so the station is set up for workshop use straight away.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Processes
- TIG, MMA
- TIG modes
- continuous, pulsed, synergic; 2T, 4T, LIFT-ARC, HF, 4T BI-LEVEL, 2T SPOT
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Compared with the standalone Alfin 300 T inverter, this version differs in its equipment. ALFA IN supplies the Alfin 300 T power source, the CS cooling unit and the trolley under one part number, and the gas hose and earth cable are included. This kit is chosen when a mobile TIG station with torch cooling is needed without selecting components separately. The power source and cooling unit are mounted on the trolley and moved between workplaces in the workshop.
The Alfin 300 T is an inverter source for MMA, TIG without pulse, pulsed TIG and synergic TIG. In TIG, 2T and 4T modes are available with arc striking by LIFT-ARC contact or HF, plus 4T BI-LEVEL with two currents and 2T SPOT spot welding, with or without HF. The TIG pulse is fully adjustable, and there is a synergic pulse. The welder sets current rise and fall, post-gas flow and the final current.
The unit has ALFA IN processes for thin metal. Q START makes neat tacks without discolouration. MULTI-TACK makes very thin sheet welds without distortion: the current switches on and off periodically, the welder sets the on-time, and the pause is preset at the factory. DYNAMIC ARC adjusts the arc as the torch is moved away and gives a steady penetration, while Q-Spot makes precise tacks with minimal heat input and sheet distortion.
In MMA mode HOT START, ARC FORCE and ANTISTICK are available. HOT START eases striking with a brief rise in current above the set value, ARC FORCE steadies the arc against voltage swings caused by hand tremor, and ANTISTICK cuts the current if the electrode sticks or is about to stick to the workpiece. A microprocessor controls all welding parameters, and 50 user programmes (JOB) can be stored, with a reset to factory settings. The current can be controlled with the UD buttons on the torch, and the manual describes remote current control.
The kit is built for heavy working and climatic conditions and complies with CE marking requirements. Because the gas hose and earth cable are included, the station is assembled for workshop use with those parts already in place.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Processes | TIG, MMA |
| TIG modes | continuous, pulsed, synergic; 2T, 4T, LIFT-ARC, HF, 4T BI-LEVEL, 2T SPOT |
| Functions | Q START, MULTI-TACK, DYNAMIC ARC, Q-Spot, HOT START, ARC FORCE, ANTISTICK |
| Programme memory | 50 JOB |
| Remote control | UD buttons on the torch |
| Kit | Alfin 300 T power source, CS cooling unit, trolley, gas hose, earth cable |
Part numbers
Show all part numbers (1)
5.0280
Request a price and lead time
ALFA IN Alfin 300 T kit with CS cooling unit and trolley, TIG and MMA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What does the Alfin 300 T kit with the CS unit include?
The Alfin 300 T power source, the CS cooling unit, a trolley, a gas hose and an earth cable.
How does the Alfin 300 T handle thin sheet?
MULTI-TACK switches the current on and off periodically, so very thin sheet welds with little or no distortion, while Q START and Q-Spot make neat tacks.
How many programmes can be saved?
The memory holds 50 user programmes (JOB), and a reset to factory settings is available.
Similar equipment from other manufacturers






