International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN Alfin 204 T PFC single-phase TIG DC and MMA inverter, 5–200 A

The Alfin 204 T PFC from ALFA IN is a single-phase inverter for DC TIG arc welding and manual metal arc welding. Its power factor correction (PFC) circuit keeps working at mains voltages from 98 to 263 V, and the unit can also weld with cellulose electrodes.

Brand
ALFA IN
Country of manufacture
Czech Republic
Processes
TIG DC, MMA
Welding current range, A
5-200

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The main difference between the Alfin 204 T PFC and the other single-phase models in the Alfin series is the power factor correction (PFC) on the input. According to ALFA IN, the unit welds across a mains voltage range of 98 to 263 V at 50–60 Hz. If the voltage drops below 190 V, the inverter reduces its maximum available power on its own and carries on working. The welding current range runs from 5 to 200 A: 200 A at a 30% duty cycle, 140 A at 60% and 130 A at 100%. The unit weighs 9.8 kg, and the mains protection is 16 A.

The inverter works in four processes: MMA, continuous-current TIG, pulsed TIG and synergic TIG. Every TIG process offers 2T and 4T torch modes, with arc striking by LIFT-ARC contact or high-frequency HF, and 4T BI-LEVEL, which switches between two currents. There is also 2T SPOT for spot welding. Pulsed TIG is fully adjustable, and in synergic pulse the parameters are chosen automatically for the set current. Current rise and fall, the final current and post-gas flow are adjusted separately.

For thin metal, ALFA IN has developed its own processes. DYNAMIC ARC (DYNarc) changes the arc when the torch is pulled back, giving better penetration and a steadier arc. Q START is designed for neat tacks without discolouration of the metal, and is recommended for thin sheet. MULTI-TACK switches the welding current on and off periodically, so the metal melts less, the process runs more slowly, and very thin sheet welds with little or no distortion. Q-Spot makes precise tacks with low heat input, with the electrode set exactly over the tack point.

In MMA mode the unit has HOT-START for easier striking, ARC-FORCE for a stable arc and ANTI-STICK to prevent the electrode sticking. It welds cellulose electrodes. A microprocessor controls all welding parameters, and 50 user programmes (JOB) can be saved in memory. The current can be changed remotely with the UD buttons on the torch, and a foot pedal can be connected.

The housing and electronics are designed for heavy working and climatic conditions. The unit complies with CE marking requirements. The Alfin 204 T PFC suits workshops and mobile crews that need TIG welding of thin sheet with tacks that do not distort, and also manual arc welding with stick electrodes from a single-phase mains, including where the voltage sags. The inverter comes with a TIG torch of your choice, a gas hose and an earth cable, and can be placed on an Alfin welding trolley.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
ProcessesTIG DC, MMA
Welding current range, A5-200
Welding current at 100% duty, A130
Welding current at 60% duty, A140
Welding current at 30% duty, A200
Mains voltage, V230 (1x230 V)
Permitted mains voltage range98–263 V, 50–60 Hz
Mains protection16 A
Programme memory50 JOB
Weight, kg9.8

Part numbers

Show all part numbers (1)

5.0262

Request a price and lead time

ALFA IN Alfin 204 T PFC single-phase TIG DC and MMA inverter, 5–200 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the Alfin 204 T PFC work with low mains voltage?

According to ALFA IN, it welds at mains voltages from 98 to 263 V. Below 190 V the inverter automatically reduces its maximum power.

What current does the unit deliver during continuous work?

130 A at 100% duty and 140 A at 60%, with a maximum of 200 A at a 30% duty cycle.

Can cellulose electrodes be used?

Yes, in MMA mode the Alfin 204 T PFC works with cellulose electrodes, and it has HOT-START, ARC-FORCE and ANTI-STICK functions.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides