International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN Alfin 172 T TIG and MMA inverter, 5-170 A, 230 V, 50 JOB programmes

ALFA IN Alfin 172 T is a single-phase inverter for DC TIG and MMA welding, including cellulose electrodes. It delivers 170 A at a 40% duty cycle, with pulse, synergic control, BI-LEVEL and memory for 50 programmes.

Brand
ALFA IN
Country of manufacture
Czech Republic
Method
TIG, MMA
Welding current range, A
5-170

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Alfin 172 T is a single-phase model in the Alfin range, positioned below the Alfin 204 T PFC, but it carries the full TIG feature set of the larger machines. The current range is 5 to 170 A. The maximum of 170 A is available at a 40% duty cycle, 150 A at 60% and 130 A at 100%. The unit runs from a 230 V mains supply with 16 A (25 A) mains protection and weighs 8.6 kg. Because it welds with cellulose electrodes in MMA mode, it widens the choice of electrodes for installation work.

Alfin 172 T welds with MMA and with TIG in continuous, pulsed and synergic pulsed modes. In each of the three TIG modes you can use 2T or 4T with LIFT-ARC or HF ignition, plus 4T BI-LEVEL with two currents, which also works with HF, and 2T SPOT for spot welding. Pulsed TIG is fully adjustable, while synergic pulse ties the pulse parameters to the current. Up-slope and down-slope, post-gas and crater current can all be set.

The unit has ALFA IN processes for thin sheet. DYNAMIC ARC (DYNarc) adjusts the arc as the torch moves away, giving better penetration and stability. Q START gives tacks suited to thin metal, and MULTI-TACK switches the current on and off periodically, so thin sheets melt less and distort little or not at all. Q-Spot makes precise tacks with low heat input.

A microprocessor controls all welding parameters, and 50 user programmes (JOB) can be stored. Current can be adjusted from the torch with UD buttons, and a foot pedal can be connected. For MMA there are HOT-START, ARC-FORCE and ANTI-STICK functions. The design is built for heavy duty and harsh climatic conditions, and the unit meets CE marking requirements.

Alfin 172 T suits workshops and installation crews that need TIG with pulse and programmes from a single-phase supply, as well as manual welding with cellulose electrodes. The torch can be the SGT or ARC T with gas cooling, and accessories include an ALFIN G1/4 connector set, cables and a trolley.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
MethodTIG, MMA
Welding current range, A5-170
Welding current at 100% duty cycle, A130(130)
Welding current at 60% duty cycle, A150(150)
Welding current at x% duty cycle, A40%=170(40%=170)
Mains voltage, V230
Mains protection16@(25@)
Program memory50 JOB
Weight, kg8.6

Part numbers

Show all part numbers (1)

5.0289

Request a price and lead time

ALFA IN Alfin 172 T TIG and MMA inverter, 5-170 A, 230 V, 50 JOB programmes. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What can Alfin 172 T do beyond basic TIG?

Pulsed and synergic pulsed TIG, BI-LEVEL, memory for 50 JOB programmes, Q START, MULTI-TACK and DYNAMIC ARC functions, and welding with cellulose electrodes in MMA mode.

Which torches are suitable?

ALFA IN offers gas-cooled SGT or ARC T TIG torches for this unit.

Can the current be changed from the torch?

Yes, the unit supports UD buttons on the torch, and a foot pedal can also be connected.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides