
Kühtreiber MAKin 320 P HF AC|DC TIG AC/DC and MMA inverter, 10 to 320 A, 3×400 V
The Kühtreiber MAKin 320 P HF AC|DC is a three-phase inverter source for MMA, TIG AC and TIG DC welding with contactless HF arc ignition. It is designed for workshop use with aluminium, stainless steel and carbon steel at currents up to 320 A.
- Brand
- Kühtreiber
- Country of manufacture
- Czech Republic
- Welding method
- MMA / TIG AC / TIG DC, HF ignition
- Supply voltage 50/60 Hz
- 3 x 400 V (±10 %)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The MAKin 320 P HF AC|DC from the Czech manufacturer Kühtreiber is a professional inverter for MMA, TIG AC and TIG DC welding. The arc is struck without contact by a high-frequency (HF) pulse, and that function can be switched off. The source has a steeply falling output characteristic. Its build combines a high-frequency transformer with a ferrite core, transistors, digital control and SMD technology.
The unit runs from a three-phase 3 x 400 V (±10%) supply at 50/60 Hz with a 25 A slow-blow fuse. Welding current spans 10 to 320 A. At 40 °C the duty cycle is 320 A at 60% and 250 A at 100%, so long welds at full current are within reach. TIG power is 9 kW, MMA power is 13 kW, efficiency is 85% and the no-load voltage is 74 V. The manufacturer states that the model complies with EU ecodesign standards.
For MMA, HOT START eases the striking of coated electrodes, ANTI STICK frees an electrode that has stuck, and ARC FORCE keeps the arc stable. The V.R.D. safety system holds the output terminals at 15 V when idle, and SOFT START guards against circuit breakers tripping. The source can also run from a generator.
In TIG DC you set pre-flow and post-flow gas, start and end current, 2-step and 4-step triggering, UP-SLOPE and DOWN-SLOPE, PULSE DC and BALANCE DC. TIG AC adds PULSE, BALANCE, AC frequency (FREQUENCY AC) and AC balance (Duty Cycle), which are used to clean the oxide film and control penetration in aluminium.
A remote control for welding current can be connected, as can the MAKin liquid cooling unit for the torch. The thermal protection gives a light signal. The enclosure carries IP23 H protection and measures 655 x 255 x 485 mm, and the power source weighs 26 kg. The unit suits production bays where thick aluminium and stainless steel must be welded, and it also handles MMA work on the same machine.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Country of manufacture | Czech Republic |
| Welding method | MMA / TIG AC / TIG DC, HF ignition |
| Supply voltage 50/60 Hz | 3 x 400 V (±10 %) |
| Slow-blow fuse | 25 A |
| Welding current range | 10–320 A |
| Duty cycle 100 % (40 °C) | 250 A |
| Duty cycle 60 % (40 °C) | 320 A |
| TIG power | 9 kW |
| MMA power | 13 kW |
| Open-circuit voltage | 74 V |
| Efficiency | 85% |
| Protection rating | IP23 H |
| Dimensions | 655 x 255 x 485 mm |
| Weight of power source | 26 kg |
Part numbers
Show all part numbers (1)
068710003
Request a price and lead time
Kühtreiber MAKin 320 P HF AC|DC TIG AC/DC and MMA inverter, 10 to 320 A, 3×400 V. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can liquid cooling be connected to the MAKin 320 P HF AC|DC?
Yes, the manufacturer provides for a MAKin cooling unit to be connected, which suits long TIG runs at high current.
What duty cycle applies at the maximum current?
320 A at 60% duty and 250 A at 100% duty, both measured at 40 °C.
What supply does the unit need?
A three-phase 3 x 400 V (±10%) supply at 50/60 Hz with a 25 A slow-blow fuse. Power draw reaches 13 kW in MMA.
Similar equipment from other manufacturers






