
Kühtreiber MAKin 250 TIG HF DC welding inverter for TIG and MMA, 250 A, three-phase
The Kühtreiber MAKin 250 TIG HF is a welding inverter for manual metal arc with covered electrodes and for DC TIG. Non-contact HF striking can be switched on or off, and the current runs from 5 to 250 A on a three-phase 3 x 400 V (±10 %) supply.
- Brand
- Kühtreiber
- Welding processes
- MMA, TIG DC (HF on/off)
- Supply voltage 50/60 Hz
- 3 x 400 V (±10 %)
- Fuse, slow-blow
- 16 A
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The MAKin 250 TIG HF from the Czech maker Kühtreiber welds by two methods, manual metal arc with covered electrodes and DC TIG. Whether high-frequency non-contact arc striking is switched on depends on the job, and the welder makes that choice. The unit runs from a 3 x 400 V (±10 %) supply at 50/60 Hz and needs a 16 A slow-blow fuse on the line.
The power source has a steeply falling volt-ampere characteristic. It is built around a ferrite-core high-frequency transformer and transistors, with digital control and SMD electronics. Efficiency is 85 %, and the unit meets strict EU ecodesign requirements for welding equipment. Stable arc, economical running and straightforward control are emphasised by the maker.
Welding current runs from 5 to 250 A, and the duty cycle at 40 °C is 195 A at 100 % and 250 A at 60 %. No-load voltage is 73 V. In MMA, HOT START eases striking, ANTI STICK releases a stuck electrode, ARC FORCE keeps the arc stable and SOFT START MMA stops the mains breakers tripping, while the V.R.D. system holds 15 V on the output terminals at rest. Generator operation is also listed.
For TIG DC there are pre-gas and post-gas, start and end current, 2-TAKT and 4-TAKT modes, UP-SLOPE and DOWN-SLOPE, PULSE DC and BALANCE DC. A remote control can be connected to adjust the welding current, and the thermal protection has a light indicator. A handle allows the unit to be carried.
Dimensions are 490 x 190 x 355 mm, the source weighs 12 kg, and the protection class is IP23 H. The three-phase supply suits workshops and production sections where long seams are welded at high currents.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Welding processes | MMA, TIG DC (HF on/off) |
| Supply voltage 50/60 Hz | 3 x 400 V (±10 %) |
| Fuse, slow-blow | 16 A |
| Welding current range | 5 - 250 A |
| Duty cycle 100% (40 °C) | 195 A |
| Duty cycle 60% (40 °C) | 250 A |
| No-load voltage | 73 V |
| Efficiency | 85 % |
| Protection class | IP23 H |
| Dimensions | 490 x 190 x 355 mm |
| Source weight | 12 kg |
Part numbers
Show all part numbers (1)
068710139
Request a price and lead time
Kühtreiber MAKin 250 TIG HF DC welding inverter for TIG and MMA, 250 A, three-phase. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What supply does the MAKin 250 TIG HF need?
A three-phase 3 x 400 V (±10 %) supply at 50/60 Hz with a 16 A slow-blow fuse. The maker also lists generator operation.
What duty cycle does it give at 40 °C?
195 A at 100 % duty cycle and 250 A at 60 %, with adjustment from 5 to 250 A.
Can it weld TIG without HF striking?
Yes. HF striking can be switched on or off, and DC TIG offers PULSE DC, BALANCE DC, UP-SLOPE and DOWN-SLOPE, plus 2-TAKT and 4-TAKT modes.
Similar equipment from other manufacturers






