International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber MAKin 200 TIG HF DC welding inverter for TIG and MMA, 200 A, single-phase

The Kühtreiber MAKin 200 TIG HF is a professional welding inverter for manual metal arc with covered electrodes and for DC TIG. Non-contact HF arc striking can be switched on or off, and the current runs from 5 to 200 A on a single-phase 1 x 230 V (±15 %) supply.

Brand
Kühtreiber
Welding processes
MMA, TIG DC (HF on/off)
Supply voltage 50/60 Hz
1 x 230 V (±15 %)
Fuse, slow-blow
16 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The MAKin 200 TIG HF from the Czech maker Kühtreiber welds by two methods: manual metal arc with covered electrodes and DC TIG. The welder can switch high-frequency non-contact arc striking on or off as conditions require. The machine runs from a 1 x 230 V (±15 %) supply at 50/60 Hz and needs a 16 A slow-blow fuse on the line.

The power source has a steeply falling volt-ampere characteristic. It is built around a ferrite-core high-frequency transformer and transistors, with digital control and SMD electronics. Efficiency is 85 %, and the unit meets the strict EU ecodesign requirements for welding equipment. The maker highlights a stable arc, economical operation and simple control.

Welding current is adjustable from 5 to 200 A. Duty cycle at 40 °C is 120 A at 100 %, 155 A at 60 % and 200 A at 40 %. Power reaches 4.9 kW and the no-load voltage is 89 V.

In MMA, HOT START eases striking, ANTI STICK frees a sticking electrode, ARC FORCE keeps the arc steady, and the V.R.D. safety system holds the output terminals at 15 V at rest. SOFT START MMA stops the circuit breakers tripping, and the maker lists operation from a generator as well. TIG DC adds pre-gas and post-gas, start and end current, 2-TAKT and 4-TAKT modes, UP-SLOPE and DOWN-SLOPE, PULSE DC and BALANCE DC. A remote control can be connected to adjust the welding current, and the thermal protection has a light indicator.

Dimensions are 410 x 150 x 295 mm, the source weighs 7 kg, and the protection class is IP23 H, with a carry handle for moving it. The single-phase supply and light weight make it practical for installation, repair and mobile work.

Technical specifications

BrandKühtreiber
Welding processesMMA, TIG DC (HF on/off)
Supply voltage 50/60 Hz1 x 230 V (±15 %)
Fuse, slow-blow16 A
Welding current range5 - 200 A
Duty cycle 100% (40 °C)120 A
Duty cycle 60% (40 °C)155 A
Duty cycle 40% (40 °C)200 A
Power4.9 kW
No-load voltage89 V
Efficiency85 %
Protection classIP23 H
Dimensions410 x 150 x 295 mm
Source weight7 kg

Part numbers

Show all part numbers (1)

068710463

Request a price and lead time

Kühtreiber MAKin 200 TIG HF DC welding inverter for TIG and MMA, 200 A, single-phase. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What supply does the MAKin 200 TIG HF need?

A single-phase 1 x 230 V (±15 %) supply at 50/60 Hz with a 16 A slow-blow fuse. The maker also allows generator operation.

What duty cycle can it sustain at 40 °C?

It gives 120 A at 100 % duty cycle, 155 A at 60 % and 200 A at 40 %, within a current range of 5 to 200 A.

Can it weld TIG without HF striking?

Yes. The HF arc striking can be switched on or off, and DC TIG offers PULSE DC, BALANCE DC, UP-SLOPE and DOWN-SLOPE, plus 2-TAKT and 4-TAKT modes.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides