
Kühtreiber MAKin 200 P HF AC|DC single-phase TIG AC/DC and MMA inverter, 5 to 200 A
The Kühtreiber MAKin 200 P HF AC|DC is a single-phase inverter for MMA, TIG AC and TIG DC welding with contactless HF arc ignition. It suits aluminium, stainless steel and carbon steel in the workshop and on site, and the power source weighs 10.5 kg.
- Brand
- Kühtreiber
- Country of manufacture
- Czech Republic
- Welding method
- MMA / TIG AC / TIG DC, HF ignition
- Supply voltage 50/60 Hz
- 1 x 230 V (±15 %)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The MAKin 200 P HF AC|DC is a professional inverter from the Czech manufacturer Kühtreiber, built for MMA, TIG AC and TIG DC welding. The arc is struck without contact by a high-frequency (HF) pulse, which can be switched off when it is not needed. The power source has an output curve that falls steeply, and its interior holds a high-frequency transformer with a ferrite core, transistors, digital control and SMD technology.
A single-phase 1 x 230 V (±15%) supply at 50/60 Hz feeds the unit through a 16 A slow-blow fuse, and the manufacturer notes that it can also run from a generator. Welding current starts at 5 A, which helps with thin sheet, and reaches 200 A. At 40 °C the duty cycle is 130 A at 100%, 165 A at 60% and 200 A at 40%. Power draw is 6.4 kW, efficiency is 85% and the no-load voltage is 70 V. The manufacturer states that the model complies with EU ecodesign standards and holds a stable arc while using energy economically.
In MMA mode HOT START makes coated electrodes easier to strike, ANTI STICK releases an electrode that has stuck, and ARC FORCE steadies the arc. The V.R.D. safety system holds the output terminals at 15 V when idle, and SOFT START prevents breakers from tripping on switch-on.
TIG DC provides pre-flow and post-flow gas, start and end current, 2-step and 4-step modes, UP-SLOPE and DOWN-SLOPE, PULSE DC and BALANCE DC. TIG AC adds PULSE, BALANCE, AC frequency (FREQUENCY AC) and AC balance (Duty Cycle), which together give controlled oxide cleaning when welding aluminium.
A remote control for welding current can be connected. The thermal protection has a light indicator. The enclosure carries IP23 H protection and measures 490 x 150 x 310 mm, and the power source weighs 10.5 kg, so it is easy to move between workstations. It is intended for repair workshops, fabrication of aluminium and stainless steel structures, and installation work where only a single-phase supply is available.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Country of manufacture | Czech Republic |
| Welding method | MMA / TIG AC / TIG DC, HF ignition |
| Supply voltage 50/60 Hz | 1 x 230 V (±15 %) |
| Slow-blow fuse | 16 A |
| Welding current range | 5–200 A |
| Duty cycle 100 % (40 °C) | 130 A |
| Duty cycle 60 % (40 °C) | 165 A |
| Duty cycle 40 % (40 °C) | 200 A |
| Power | 6.4 kW |
| Open-circuit voltage | 70 V |
| Efficiency | 85% |
| Protection rating | IP23 H |
| Dimensions | 490 x 150 x 310 mm |
| Weight of power source | 10.5 kg |
Part numbers
Show all part numbers (1)
068710461
Request a price and lead time
Kühtreiber MAKin 200 P HF AC|DC single-phase TIG AC/DC and MMA inverter, 5 to 200 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which supply does the MAKin 200 P HF AC|DC need?
A single-phase 1 x 230 V (±15%) supply at 50/60 Hz with a 16 A slow-blow fuse. The manufacturer also allows operation from a generator.
What duty cycle does it offer at 40 °C?
130 A at 100%, 165 A at 60% and 200 A at 40%.
Can it weld thin aluminium?
Yes, the minimum current of 5 A, the TIG AC mode with adjustable AC frequency and balance, and the PULSE function all help with thin aluminium.
Similar equipment from other manufacturers






