
Kühtreiber KITin 1700 HF single-phase TIG HF and MMA welding inverter, 170 A
The Kühtreiber KITin 1700 HF is a single-phase inverter for TIG welding with contactless HF arc ignition and for manual metal arc welding with coated electrodes. Current runs from 10 to 170 A, and at a 60 % duty cycle the unit delivers 120 A. It is intended for industrial and professional work on stainless steel, copper and copper alloys.
- Brand
- Kühtreiber
- Country of manufacture
- Czech Republic
- Model
- KITin 1700 HF
- Welding methods
- MMA, TIG (HF ignition)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The KITin 1700 HF is a single-phase inverter from the Czech company Kühtreiber, built for two processes: TIG with contactless arc ignition and manual metal arc welding with coated electrodes. It is aimed at industrial and professional users. TIG covers stainless steel, copper and copper alloys, and MMA with coated electrodes handles ordinary steel work.
Power is taken from a single-phase 1x 230 V supply at 50/60 Hz through a 16 A slow-blow fuse. The inverter runs on high-frequency technology with fast regulation of welding current, so the arc reacts immediately to a change of setting and stays steady even at low currents. In TIG the electrode never touches the workpiece, which keeps the tungsten sharp for longer and stops tungsten particles from entering the weld.
Welding current runs from 10 to 170 A. Duty cycle is 95 A at 100 % and 120 A at 60 %, while the maximum current is held at a 30 % duty cycle. At 60 % the unit draws 16 A / 3.6 kVA from the mains, and the no-load voltage is 88 V. With its IP 23 S housing, 245 × 143 × 390 mm dimensions and 6.7 kg weight, it is easy to carry between workstations and out to site.
TIG mode offers smooth current upslope and downslope through TIG UP/DOWN SLOPE, 2T and 4T triggering, the TIG CYCLE function, and pulsed welding with TIG PULSE, with an adjustable second current level I2 and pulse frequency. A TIG END CURRENT crater setting is included, and pre-gas and post-gas times are adjusted separately. A UP-DOWN remote control plugs into the TIG torch handle, letting the welder change current without stepping away from the job. In MMA, HOT START aids striking, ARC FORCE supports a short arc, and ANTI STICK releases a stuck electrode by cutting the current. A UP–DOWN remote control is provided for MMA as well.
The control panel shows set values on a clear display, with simple graphics and large buttons, so setting a mode takes little time. The manufacturer highlights high duty cycle and output, good welding properties and a small size with low weight. The KITin 1700 HF suits TIG work on stainless steel, copper and its alloys in workshops and on site, plus manual arc welding with coated electrodes. Part number 50095.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Country of manufacture | Czech Republic |
| Model | KITin 1700 HF |
| Welding methods | MMA, TIG (HF ignition) |
| Supply voltage 50/60 Hz | 1× 230 V |
| Slow-blow fuse | 16 A |
| Welding current range | 10 – 170 A |
| Duty cycle 100 % | 95 A |
| Duty cycle 60 % | 120 A |
| Duty cycle at maximum current | 30 % |
| Mains current / power at 60 % | 16 A / 3,6 kVA |
| No-load voltage | 88 V |
| Protection class | IP 23 S |
| Torch connector | 35–50 |
| Dimensions | 245 × 143 × 390 mm |
| Weight | 6,7 kg |
Part numbers
Show all part numbers (1)
50095
Request a price and lead time
Kühtreiber KITin 1700 HF single-phase TIG HF and MMA welding inverter, 170 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which mains supply does the KITin 1700 HF need?
Single-phase 1x 230 V, 50/60 Hz, with a 16 A slow-blow fuse. At a 60 % duty cycle the unit draws 16 A / 3.6 kVA.
What current does the unit hold for continuous work?
95 A at 100 % duty cycle and 120 A at 60 %. The maximum of 170 A is available at a 30 % duty cycle.
Which metals suit TIG on this machine?
The manufacturer names stainless steel, copper and its alloys. The arc is struck without contact by HF, and the TIG PULSE mode is suited to thin metal.
Similar equipment from other manufacturers






