International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber FĒNIX 250 PFC AC|DC TIG AC/DC and MMA inverter, 10 to 250 A, 1×230 V

The Kühtreiber FĒNIX 250 PFC AC|DC is a portable digital source for TIG welding on AC and DC and for MMA, running from a 1×230 V mains supply. It welds aluminium, CrNi, carbon steel and special materials, and it keeps working on a mains supply with voltage dips down to 90 V or from a generator.

Brand
Kühtreiber
Country of manufacture
Czech Republic
Welding method
MMA / TIG HF (AC/DC)
Supply voltage 50/60 Hz
1×230 V (-60 %; +15 %)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The FĒNIX 250 PFC AC|DC from the Czech maker Kühtreiber is a portable inverter with fully digital control. It welds by TIG on AC and DC with high-frequency (HF) arc starting, and by MMA using coated electrodes. The TIG current range runs from 10 to 250 A and the MMA range from 10 to 200 A. Duty cycle at 60% gives 190 A for TIG and 170 A for MMA, at 100% the figures are 150 A and 130 A, and at 30% they reach 250 A and 200 A. The manufacturer measured these ratings in a thermal chamber held at a steady 40 °C.

A power factor correction (PFC) stage keeps the arc steady when mains voltage fluctuates, on long extension leads and when the unit runs from a generator. It begins working from 90 V, which corresponds to a supply sag of 60%. A generator of at least 3.5 kVA with an A.V.R. function is needed, and an extension lead up to 200 m long with 2.5 mm² conductors can be used.

In MMA mode HOT START eases striking of coated electrodes, ANTI STICK frees an electrode that has stuck, and ARC FORCE keeps the arc stable. The V.R.D. safety system holds the output terminals at 15 V when the unit is idle. SOFT START guards against circuit breakers tripping, the SOFT and HOT START durations can be set, and the input current can be limited. JOB MODE stores your own programmes and settings.

TIG DC offers pre-flow and post-flow gas timing, start and end current, 2-step and 4-step triggering, UP-SLOPE and DOWN-SLOPE, PULSE, DOUBLE PULSE, adjustable frequency and pulse balance, and SPOT PULSE for spot and interval welding. A CYCLE function switches between two currents for parts of differing thickness, while TIG PULSE reduces heat input and distortion in thin metal. TIG AC adds HOT SPOT for striking, AC frequency and AC balance (Duty cycle) control, DOWN-SLOPE, DOUBLE PULSE, end current and generator operation.

All controls sit on a push-button keypad, and a remote current control can be connected, including an UP/DOWN function on the torch. The thermal protection has a warning light. The recommended torch is the KTB 26, the welding cable cross-section is 35–50, and the enclosure carries IP 23 S protection. Dimensions are 476 × 186 × 279 mm and the weight is 14.6 kg, so the unit suits repair and fitting work with aluminium and stainless steel, both in the workshop and on site.

Technical specifications

BrandKühtreiber
Country of manufactureCzech Republic
Welding methodMMA / TIG HF (AC/DC)
Supply voltage 50/60 Hz1×230 V (-60 %; +15 %)
Slow-blow fuse (characteristic D)20 A
Welding current rangeTIG 10–250 A / MMA 10–200 A
Duty cycle 100 %TIG 150 A / MMA 130 A
Duty cycle 60 %TIG 190 A / MMA 170 A
Duty cycle 30 %TIG 250 A / MMA 200 A
Mains current / consumption (60 %)19.5 A / 4.5 kVA (TIG), 25.1 A / 5.8 kVA (MMA)
Open-circuit voltage88 V
Protection ratingIP 23 S
Welding cable cross-section35–50
Recommended torchKTB 26
Dimensions476 × 186 × 279 mm
Weight14.6 kg

Part numbers

Show all part numbers (1)

51322

Request a price and lead time

Kühtreiber FĒNIX 250 PFC AC|DC TIG AC/DC and MMA inverter, 10 to 250 A, 1×230 V. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the FĒNIX 250 PFC AC|DC run from a generator?

Yes, the manufacturer specifies a generator of at least 3.5 kVA with an A.V.R. function. The unit still welds when the mains sags to 90 V.

What current can it hold continuously in TIG mode?

At 100% duty it gives 150 A, at 60% it gives 190 A and at 30% it gives 250 A, measured at 40 °C.

Is the unit suitable for welding aluminium?

Yes, the TIG AC mode with adjustable AC frequency and balance is intended for aluminium, while TIG DC suits CrNi and steel.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides