
Kühtreiber FĒNIX 200 PFC MMA and TIG inverter with PFC, 10 to 200 A, 1×230 V
The Kühtreiber FĒNIX 200 PFC is a portable inverter for manual arc welding with MMA and TIG LIFT ARC that uses power factor correction. It welds with a mains voltage as low as 90 V, from a generator and through an extension lead of up to 200 m, and weighs 5.5 kg.
- Brand
- Kühtreiber
- Country of manufacture
- Czech Republic
- Welding method
- MMA / TIG (LIFT ARC)
- Supply voltage 50/60 Hz
- 1x~230 V (-60%; +15%)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The FĒNIX 200 PFC from the Czech brand Kühtreiber is a portable inverter for MMA and TIG welding, built to work at reduced mains voltage. It uses PFC (Power Factor Correction) and an energy-saving microprocessor inverter circuit with a planar transformer. The input current is shaped to be close to sinusoidal, and efficiency reaches up to 92%.
PFC keeps the process steady when mains voltage fluctuates, on long extension leads and when the unit runs from a generator. It starts working from 90 V, which corresponds to a 60% sag, and at that level it welds electrodes of 1.6, 2.0, 2.5, 3.2 and 4.0 mm. A generator of at least 3.5 kVA with an A.V.R. function is needed, and an extension lead of up to 200 m with a 2.5 mm² cross-section can be used.
On the same fuse rating the manufacturer says the unit draws more power than conventional welders, yet it can weld at 200 A where a conventional unit would trip a 150 A breaker. The current runs from 10 to 200 A. Duty cycle, measured at 40 °C in a thermal chamber, is 140 A at 100%, 165 A at 60% and 200 A at 40%. Mains current and consumption at 60% duty are 20 A and 4.6 kVA, the no-load voltage is 88 V, and the slow-blow fuse is rated at 20 A.
In MMA mode the controls include HOT START, ANTI STICK, ARC FORCE, SOFT START MMA and the V.R.D. safety system, which holds the output terminals at 15 V when idle. In TIG mode the arc is struck by LIFT ARC touch, and PULSE, PULSE FREQUENCY, DOWN SLOPE (decay time to end current) and END CURRENT are available. A remote current control can be connected.
Thermal protection has a warning light, and the unit indicates overvoltage and undervoltage. A carrying strap is fitted. The enclosure carries IP 23 S protection and measures 225 × 112 × 425 mm, weighs 5.5 kg, and cables connect through 35–50 mm connectors. It suits installers, service crews and repair jobs at sites with a weak mains supply.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Country of manufacture | Czech Republic |
| Welding method | MMA / TIG (LIFT ARC) |
| Supply voltage 50/60 Hz | 1x~230 V (-60%; +15%) |
| Slow-blow fuse | 20 A |
| Welding current range | 10–200 A |
| Duty cycle 100 % | 140 A |
| Duty cycle 60 % | 165 A |
| Duty cycle 40 % | 200 A |
| Mains current / consumption (60 %) | 20 A / 4.6 kVA |
| Open-circuit voltage | 88 V |
| Efficiency | up to 92% |
| Protection rating | IP 23 S |
| Welding cable connector | 35–50 mm |
| Dimensions | 225 × 112 × 425 mm |
| Weight | 5.5 kg |
Part numbers
Show all part numbers (1)
51348
Request a price and lead time
Kühtreiber FĒNIX 200 PFC MMA and TIG inverter with PFC, 10 to 200 A, 1×230 V. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which electrodes can the FĒNIX 200 PFC weld with at 90 V mains?
At a 60% sag, from 90 V, the manufacturer quotes electrodes of 1.6, 2.0, 2.5, 3.2 and 4.0 mm.
Can it run from a generator or a long extension lead?
Yes, from a generator of at least 3.5 kVA with an A.V.R. function and through an extension lead of up to 200 m with a 2.5 mm² cross-section.
How does it behave on a weak breaker?
The current-limiting function emulates a fuse rated from 5 to 30 A, and SOFT START MMA prevents the breaker from tripping when striking.
Similar equipment from other manufacturers






