International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber FĒNIX 200 portable MMA and TIG inverter, 10 to 190 A, 1×230 V

The Kühtreiber FĒNIX 200 is a light inverter for manual arc welding with MMA and TIG LIFT ARC that runs from a single-phase mains supply. It keeps welding with the mains voltage down by 40%, from a generator of 3.5 kVA and above, or through an extension lead of up to 200 m.

Brand
Kühtreiber
Country of manufacture
Czech Republic
Welding method
MMA / TIG (LIFT ARC)
Supply voltage 50/60 Hz
1x~230 V (-40%; +15%)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The FĒNIX 200 from the Czech brand Kühtreiber is a portable inverter for MMA and TIG welding that can work at reduced mains voltage. It is built on an energy-saving microprocessor inverter circuit with a planar transformer. The arc characteristic keeps the arc stable when voltage fluctuates, on mains extension leads up to 200 m and when the unit runs from a generator.

The supply is 1x~230 V (-40%; +15%) at 50/60 Hz, protected by a 20 A slow-blow fuse. With the mains down by 40%, from 140 V, the unit welds electrodes of 1.6, 2.0 and 2.5 mm. A generator of at least 3.5 kVA with an A.V.R. function is needed, and an extension lead of up to 200 m with a 2.5 mm² cross-section can be used.

The current range is 10 to 190 A. Duty cycle, measured in a thermal chamber at 40 °C, is 140 A at 100%, 155 A at 60% and 190 A at 15%. Mains current and consumption at 60% duty are 19.5 A and 4.5 kVA, and the no-load voltage is 88 V.

For MMA there are HOT START for easier striking of coated electrodes, ANTI STICK to free a stuck electrode, ARC FORCE for arc stability, SOFT START MMA against breaker tripping, and the V.R.D. safety system holding the output terminals at 15 V when idle. In TIG the arc is struck by LIFT ARC touch, and PULSE, PULSE FREQUENCY, DOWN SLOPE (decay time to end current) and END CURRENT are available. A remote current control can be connected.

The controls sit on a push-button keypad that makes settings more precise. Thermal protection has a warning light, the unit indicates overvoltage and undervoltage, and a carrying strap is fitted. The enclosure carries IP 23 S protection and measures 225 × 112 × 380 mm, weighs 4.7 kg, and cable connectors are 35–50 mm. It suits installers, service call-outs and small workshops, where a light unit handles electrodes up to 2.5 mm on a weak supply and the full range on a normal one.

Technical specifications

BrandKühtreiber
Country of manufactureCzech Republic
Welding methodMMA / TIG (LIFT ARC)
Supply voltage 50/60 Hz1x~230 V (-40%; +15%)
Slow-blow fuse20 A
Welding current range10–190 A
Duty cycle 100 %140 A
Duty cycle 60 %155 A
Duty cycle 15 %190 A
Mains current / consumption (60 %)19.5 A / 4.5 kVA
Open-circuit voltage88 V
Protection ratingIP 23 S
Welding cable connector35–50 mm
Dimensions225 × 112 × 380 mm
Weight4.7 kg

Part numbers

Show all part numbers (1)

51347

Request a price and lead time

Kühtreiber FĒNIX 200 portable MMA and TIG inverter, 10 to 190 A, 1×230 V. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the FĒNIX 200 differ from the FĒNIX 200 PFC?

The FĒNIX 200 has no PFC system. It works with the mains down by 40% (from 140 V), has a range of 10 to 190 A and weighs 4.7 kg.

Which electrodes can be used at reduced voltage?

At a 40% sag the manufacturer quotes electrodes of 1.6, 2.0 and 2.5 mm.

What is the duty cycle?

140 A at 100%, 155 A at 60% and 190 A at 15%, measured at 40 °C.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides