International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN PERUN 200 T HF inverter for TIG HF, lift-arc and MMA, 5–200 A, 230V

The PERUN 200 T HF from ALFA IN is a single-phase TIG inverter with high-frequency (HF) or lift-arc striking, which also covers MMA with a maximum current of 200 A. It is the higher-rated partner of the PERUN 160 T HF, with the same weight of 7 kg and a higher maximum current.

Brand
ALFA IN
Country of manufacture
Czech Republic
Method
TIG HF, TIG LA, MMA
Welding current range, A
5–200

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The PERUN 200 T HF differs from the PERUN 160 T HF in its upper current limit, which here is 5–200 A. According to the manufacturer's data page, the unit gives 200 A at 25% duty cycle, 130 A at 60% and 100 A at 100%. The supply is 230V mains, the mains protection is 16@ and the weight is 7 kg. Both models are described in the same ALFA IN manual and share the same set of TIG functions without pulse.

The inverter is designed for professional TIG welding with high-frequency (HF) arc striking or lift-arc touch striking, and for MMA with coated electrodes. Regulation starts at 5 A, so the same source can handle small-current tack welds as well as welds near the top of its range.

In TIG mode the unit offers pre-flow and post-flow of shielding gas, current up-slope and down-slope, end current, HF striking, 2T and 4T control, Bi-level for switching to a second current during welding, and spot mode. The UP-DOWN buttons on the torch change the current without going back to the unit, and a separate connector takes a remote control. The fan works on demand and stops when cooling is not needed.

For MMA there is an adjustable HOT START that limits spatter and burn-through at striking, an adjustable ARC FORCE for arc stability, heat input and spatter, and ANTI STICK, which switches off the current when the electrode sticks. Memory holds 9 programs for stored settings. The PERUN body has covered controls, a handle that folds down out of the way, and straps for holding cables and the torch when carried. A remote welding current connector, factory reset and large 35–50 mm2 quick connectors are fitted. The unit ships with a gas hose and an earth cable, and the TIG torch is chosen from the ALFA IN torch table. A foot pedal, a remote control on a cable and a trolley are available as accessories.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
MethodTIG HF, TIG LA, MMA
Welding current range, A5–200
Welding current at 100% duty cycle, A100
Welding current at 60% duty cycle, A130
Welding current at x% duty cycle, A25%=200
Mains voltage, V230
Mains protection16@
Pulse modeno
Programs in memory9
Quick connectors, mm235–50
Weight, kg7
Supply setgas hose, earth cable

Part numbers

Show all part numbers (1)

5.0315

Request a price and lead time

ALFA IN PERUN 200 T HF inverter for TIG HF, lift-arc and MMA, 5–200 A, 230V. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the PERUN 200 T HF differ from the PERUN 160 T HF?

The current goes up to 200 A instead of 160 A, while the set of functions and the 7 kg weight are the same.

What duty cycle does the PERUN 200 T HF give?

200 A at 25% duty cycle, 130 A at 60% and 100 A at 100%.

Does the PERUN 200 T HF have a pulse mode?

No, the model has 2T/4T, Bi-level and spot mode; pulse TIG is available in the PULSE versions of the series.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides