
ALFA IN PERUN 160 E inverter for MMA and TIG lift-arc welding, 10–160 A, 230V
The PERUN 160 E from ALFA IN is a lightweight single-phase inverter for manual metal arc (MMA) and TIG welding with lift-arc touch striking. It weighs 4.4 kg, has a VRD function for work in hazardous conditions and runs a fan that comes on only when needed.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Method
- MMA, TIG LIFT ARC
- Welding current range, A
- 10–160
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The PERUN 160 E is the simplest machine in the PERUN group in this range: it has no HF striking, a single MMA/TIG process switch and a current potentiometer. Compared with the PERUN 220 E it offers a lower maximum current and a lower weight. Welding current runs from 10 to 160 A in both MMA and TIG. In MMA the unit gives 80 A at 100% duty cycle, 100 A at 60% and 160 A at 15%. In TIG it gives 90 A at 100%, 110 A at 60% and 160 A at 25%. The figures in brackets in the specification apply when the unit is fed through a 25 A fuse via an industrial 32 A plug; with a standard 16 A plug the main values apply.
The inverter runs from a 1x230 V 50–60 Hz supply, with an open-circuit voltage of 67 V. Dimensions are 160 x 370 x 280 mm, the weight is 4.4 kg and the protection class is IP23S. The unit conforms to EN 60974-1 and EN 60974-10 class A and meets the CE marking requirements. ALFA IN states that it is compatible with electrical generators.
The PERUN 160 E has a VRD function and fan-on-demand control: after about 4 minutes of inactivity the electronics switch the fan off and bring it back as soon as welding starts. This reduces wear, noise and power consumption. VRD mode is switched on from the panel and lowers the open-circuit voltage to protect the welder from electric shocks in hazardous surroundings.
For MMA there is an adjustable HOT START that eases striking and reduces spatter and burn-through, an adjustable ARC FORCE for arc stability and heat input, and ANTI STICK, which cuts the current if the electrode sticks. Nine programs can store settings, the unit can be reset to factory settings, and a remote current control connector is fitted. A green LED shows power-on and a yellow LED shows overheating. A strap on the rear panel holds the cables, the unit can be carried on the shoulder, the handle folds down and the controls are protected. Quick connectors take 35–50 mm2 cables. Typical uses are installation and repair work with stick electrodes and site work where a light machine is needed, while LIFT ARC TIG covers joints that call for TIG without a separate machine. The unit ships with a mains cord, and welding cables and the TIG torch are selected separately.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Method | MMA, TIG LIFT ARC |
| Welding current range, A | 10–160 |
| MMA: current at 100% duty cycle, A | 80 (100) |
| MMA: current at 60% duty cycle, A | 100 (120) |
| MMA: current at x% duty cycle, A | 15%=160 (25%=160) |
| TIG: current at 100% duty cycle, A | 90 (110) |
| TIG: current at 60% duty cycle, A | 110 (140) |
| TIG: current at x% duty cycle, A | 25%=160 (35%=160) |
| Mains voltage | 1x230 V / 50–60 Hz |
| Mains protection | 16 A (25 A) |
| Open-circuit voltage U20, V | 67 |
| Protection class | IP23S |
| Standards | EN 60974-1, EN 60974-10 cl. A |
| Dimensions (W x D x H), mm | 160 x 370 x 280 |
| Weight, kg | 4.4 |
| Programs in memory | 9 |
Part numbers
Show all part numbers (1)
5.0309
Request a price and lead time
ALFA IN PERUN 160 E inverter for MMA and TIG lift-arc welding, 10–160 A, 230V. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Does the PERUN 160 E have HF striking for TIG?
No, TIG is struck by lift-arc touch starting. The series includes HF models such as the PERUN T HF.
What current does MMA deliver during long operation?
80 A at 100% duty cycle and 100 A at 60%, with 160 A at 15% duty cycle.
What is VRD mode for?
VRD lowers the open-circuit voltage to protect the welder from electric shocks in hazardous surroundings, and it is switched on from the panel.
Similar equipment from other manufacturers






