
ALFA IN HOMER E 160 compact inverter for manual metal arc (MMA) welding
The HOMER E 160 is a compact, light inverter for manual arc welding with coated electrodes, made by ALFA IN under the manufacturer's HOMER tools brand. It has fully sealed IGBT modules, HOT START, ARC-FORCE and ANTI-STICK functions, and it is compatible with generator sets.
- Brand
- ALFA IN (HOMER tools brand)
- Country of manufacture
- Czech Republic
- Welding process
- MMA (coated electrode)
- Power section
- IGBT, fully sealed
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Among the ALFA IN range, the HOMER E 160 is one of the simplest MMA machines: a single process, manual arc welding with coated electrodes, and very few controls. The front panel carries a welding current potentiometer, a green power-on indicator and a yellow overheating indicator. The unit is sold under the manufacturer's HOMER tools brand and suits repair, installation and general workshop jobs where a light inverter has to be close to hand.
The power section is built from IGBT modules that are fully sealed, which keeps dust, water and humidity away from the electronics, a useful feature on a building site or in an unheated room. The body is compact and light, carried by a sturdy handle or by a strap, for which an attachment point is provided. Welding cables connect through 10-25 mm² quick connectors.
Three functions keep the arc going. HOT START raises the starting current for a set time to make striking easier. ARC-FORCE automatically compensates for voltage swings caused by the welder's hand movement and keeps the arc steady. ANTI-STICK cuts the welding current if the electrode threatens to stick or has already stuck to the workpiece, so the electrode does not overheat and can be pulled free easily.
Because it is protected and compatible with generator sets, the inverter can be taken to sites without a fixed mains supply. The manufacturer rates it for use in locations with increased risk of electric shock, which is indicated by the S mark. The unit complies with CE marking requirements and should be commissioned by trained persons in line with the operating manual.
Kit contents depend on the order. The manufacturer's page describes the unit as supplied without an earth cable and electrode holder, whereas the order table for article 5.0530-1 lists the inverter, earth cable, cable with electrode holder, mains cable and manual.
Technical specifications
| Brand | ALFA IN (HOMER tools brand) |
|---|---|
| Country of manufacture | Czech Republic |
| Welding process | MMA (coated electrode) |
| Power section | IGBT, fully sealed |
| Functions | HOT START, ARC-FORCE, ANTI-STICK |
| Quick connectors | 10-25 mm² |
| Generator operation | yes |
| Use in increased electric shock risk | yes (S mark) |
| Indicators | power on: green LED; overheating: yellow LED |
| Conformity | CE |
Part numbers
Show all part numbers (1)
5.0530-1
Request a price and lead time
ALFA IN HOMER E 160 compact inverter for manual metal arc (MMA) welding. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the HOMER E 160 suitable for?
Manual metal arc welding with coated electrodes for repair, installation and workshop jobs. The model does not support TIG or MIG/MAG.
Can I run the unit from a generator?
Yes, the manufacturer describes the inverter as protected and compatible with generator sets.
Which cables fit the HOMER E 160?
Cables for 10-25 mm² quick connectors. Confirm the kit contents when ordering article 5.0530-1.
Similar equipment from other manufacturers






