
TRM-20 winding resistance meter, 25 A DC, 1 µΩ to 2000 Ω
The TRM-20 measures the DC resistance of transformer and electrical machine windings with currents from 1 to 25 A, over a range of 1 µΩ to 2000 Ω. It offers two measuring channels, automatic discharge, demagnetisation after testing and an on-load tap changer test.
- Type
- portable winding resistance meter for transformers
- Resistance range
- 1 µΩ to 2000 Ω
- Accuracy
- 1–19999 µΩ ±0.5%; 20–999 mΩ ±1%; 1–2000 Ω ±1.5% (±1 count)
- Test current
- 1–25 A in 1 A steps
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TRM-20 measures two windings at the same time through its two input channels, for example the primary and secondary winding of a transformer. For large transformers, a 60 V DC charging source brings the current to a steady level quickly, and the voltage stays below 18 V during measurement. Test current is set from 1 to 25 A in 1 A steps.
The meter is used for DC resistance measurement of power transformer windings, rotating machine windings and any inductive object. Its range down to 1 µΩ also allows it to act as a micro-ohmmeter, for instance to measure the contact resistance of extra high voltage circuit breakers. This is the third generation of winding resistance meters in this line. For higher currents, the TRM-40 covers 1 to 40 A with an upper limit of 500 Ω.
Accuracy is ±0.5% of reading plus one count from 1 to 19999 µΩ, ±1% from 20 to 999 mΩ, and ±1.5% from 1 to 2000 Ω. After each measurement, automatic discharge removes stored energy from the winding to protect personnel, while the demagnetisation function clears residual magnetism from the core without a separate manual step. The OLTC test mode records the dynamic characteristics of the tap changer.
Memory holds 256 static reports of up to 111 measurements each and 120 dynamic reports, and up to 999 reports can be saved to an external USB drive. Results are printed by a built-in 2.5 inch thermal printer, and the backlit LCD stays readable in direct sunlight. PC communication runs over RS-232C, USB or Bluetooth.
The meter runs from 100-240 V AC at 50/60 Hz. Operating temperature is -10 to 50 °C, storage -30 to 70 °C, humidity up to 90% at 40 °C without condensation, and altitude up to 2000 m. The design complies with CAN/CSA C22.2 and UL 61010A-1. Before testing, the transformer must be disconnected and fully isolated, and leads must stay connected during measurement. The kit contains a current cable set, two sets of potential cables of 15.24 m each, a 4.57 m OLTC control cable, an earth cable, a power cable, and RS-232C and USB cables of 1.83 m each. A transport case is available as an option.
Technical specifications
| Type | portable winding resistance meter for transformers |
|---|---|
| Resistance range | 1 µΩ to 2000 Ω |
| Accuracy | 1–19999 µΩ ±0.5%; 20–999 mΩ ±1%; 1–2000 Ω ±1.5% (±1 count) |
| Test current | 1–25 A in 1 A steps |
| Voltage | 60 V DC charging, up to 18 V DC during measurement |
| Channels | two static channels |
| Display | backlit LCD, 64 × 128 dots |
| Printer | built-in thermal printer, 2.5 inch |
| Internal memory | 256 static reports of up to 111 measurements, 120 dynamic |
| External memory | up to 999 reports on a USB drive |
| Interfaces | RS-232C, USB, Bluetooth |
| Supply | 100-240 V AC, 50/60 Hz |
| Operating temperature | -10 to 50 °C |
| Storage temperature | -30 to 70 °C |
| Humidity | up to 90% at 40 °C without condensation |
| Safety | CAN/CSA C22.2 and UL 61010A-1 |
| Dimensions | 53 × 43 × 24 cm |
| Weight | 15.4 kg |
Part numbers
Show all part numbers (9)
9007-UC, 8000-0005, 8000-0006, 8000-0015, 8000-0016, 8000-0071, 8000-0083, 8000-0087, 8000-0148
Request a price and lead time
TRM-20 winding resistance meter, 25 A DC, 1 µΩ to 2000 Ω. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can two windings be measured at the same time?
Yes, the two input channels measure the resistance of two windings, such as primary and secondary, with a single current connection.
Can the instrument check the contacts of circuit breakers?
Yes, the range from 1 µΩ allows the TRM-20 to be used as a micro-ohmmeter for the contacts of extra high voltage circuit breakers.
Does the transformer need demagnetising after measurement?
The instrument demagnetises the core automatically after the test, so no separate manual operation is needed.
Similar equipment from other manufacturers






