
615-20P and 605-2P benchtop and floor AC dielectric test sets, 5–15 kV
One-piece AC high voltage test sets rated from 5 kV to 15 kV for dielectric and insulation checks on electrical products. Smaller models sit in a benchtop steel housing, while larger ones are in a floor-standing wheeled steel cabinet.
- Output voltage
- 5–15 kV AC
- Construction
- single unit, benchtop case or floor cabinet on wheels
- High-voltage transformer
- air insulated
- Voltage adjustment
- variable autotransformer, across the full range up to 100%
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Sets rated 5–15 kV AC are used for dielectric and insulation tests on electrical products of every kind, including capacitors, fuses, surge arresters, bushings, switchgear, cables and motors. Work can follow UL and CSA rules, OSHA and NEMA guidance, IEC, AEIC, IEEE, ASTM and other applicable standards.
The design is a single unit. The air-insulated high-voltage transformer, controls and regulator are housed in a painted steel benchtop case, while the larger models sit in a floor-standing steel cabinet on wheels. The output is adjusted across its whole range, up to 100 %, by a variable autotransformer.
P models have a supply circuit breaker with indicator, an external signal circuit for a flashing lamp, high voltage on and off buttons with indicators, a latching emergency stop, manual voltage adjustment, a start interlock that blocks any non-zero setting and external interlock terminals. Overload protection is adjustable from 10 % to 110 % of rated current, with an indicator and reset button. Instruments and relays are protected against slow and fast transients, and the set carries 3 ½-digit LCD meters and a digital timer with an audible alarm.
B models have a 7-inch colour touch display, automatic or hand-operated voltage control, a USB port for data logging and an Ethernet port for PC control with separate software. The display shows measurements, controls and system messages, including memory voltmeters for breakdown and maximum voltage, duration and dwell timers, a programmable voltage rise rate in V/s and a current cut-off threshold. A burn-out option places a current-limiting device in series with the primary winding, so a defect in the test object can be burned out at a controlled current.
Options available on request include cables of the required length, partial discharge certification, ISO17025 calibration, flashing or red-green lamps with a 20’ (6 m) cable, a foot-operated safety switch with a 20’ (6 m) cable and an earthing rod. Operating conditions are 10 to 40 °C, indoors or outdoors in dry weather, with humidity up to 95 % without condensation and altitudes up to 1000 m.
Technical specifications
| Output voltage | 5–15 kV AC |
|---|---|
| Construction | single unit, benchtop case or floor cabinet on wheels |
| High-voltage transformer | air insulated |
| Voltage adjustment | variable autotransformer, across the full range up to 100% |
| Overload protection | 10–110% of rated current |
| Meters, P models | digital, 3 ½-digit LCD |
| Display, B models | 7-inch colour touch screen |
| Interfaces, B models | USB, Ethernet |
| Burn-out option | current limiting in the primary winding circuit |
| Operating temperature | 10–40 °C |
| Relative humidity | <95% non-condensing |
| Altitude | <1000 m |
| Calibration | ISO17025 on request |
Part numbers
Show all part numbers (2)
615-20P, 605-2P
Request a price and lead time
615-20P and 605-2P benchtop and floor AC dielectric test sets, 5–15 kV. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which products can the set test?
Capacitors, fuses, surge arresters, bushings, switchgear, cables and motors at test voltages up to 15 kV AC.
What does the burn-out option do?
It places a current-limiting device in series with the primary winding, so a defect in the test object can be burned out at a controlled current.
How do the B models differ from the P models?
B models have a 7-inch touch display, automatic regulation, USB data logging, an Ethernet port and a memory voltmeter for breakdown voltage.
Similar equipment from other manufacturers






