
TiS75+ thermal imaging camera, 384 x 288, up to 550 °C, Wi-Fi, 9 or 27 Hz
The TiS75+ is a handheld thermal camera with a 384 x 288 detector, 40 mK thermal sensitivity and a measuring range from -20 to 550 °C. It has a 3.5 inch touchscreen, a 640 x 480 visible light camera, wireless connectivity and QR code tagging that links images to inspected equipment.
- Infrared resolution
- 384 x 288
- IFOV
- 1.91 mRad
- Field of view
- 42° x 30°
- Min. focus distance
- 0.15 m, manual focus
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TiS75+ is intended for planned thermal surveys of electrical cabinets, motors, bearings, pipework and building fabric. Each image can be linked to a specific piece of equipment, because the operator scans a QR code on the asset and the camera files the thermograms against it automatically. That makes it straightforward to compare readings taken from the same point over time, spot developing trends and fix faults before they lead to failure.
The 384 x 288 detector responds in the band of roughly 8-14 μm and has an IFOV of 1.91 mRad with a 42° x 30° field of view. Thermal sensitivity is 40 mK, and focus is set by hand from as close as 0.15 m. The measuring range runs from -20 °C to 550 °C, although readings below -10 °C are not calibrated. Accuracy is ±2 °C or 2 %, whichever is greater, at an ambient temperature of 25 °C. The camera comes in two versions that differ only in frame rate, 9 Hz or 27 Hz.
A 3.5 inch touchscreen shows the image at 640 x 480, and a visible light camera at the same resolution lets you blend the two images continuously from 0 % to 100 %, or view them picture-in-picture. The fixed centre spot is joined by five movable markers and five rectangular areas that report minimum, maximum and average temperatures. Emissivity can be adjusted between 0.01 and 1.00, six palettes are available, and the camera calculates dew point and can capture images automatically at a set interval.
Each thermogram can carry a voice note of up to 60 seconds, recorded through a Bluetooth headset, up to three extra visible light photographs and typed notes. Standard and radiometric video are supported, up to five minutes long. Internal memory holds around 500 images, and an SD card of 4 GB or more stores over 1000. Files save as BMP, JPEG or the radiometric is2 format.
Power comes from a removable lithium-ion battery that gives at least 3.5 hours of continuous use without Wi-Fi and charges in up to 2.5 hours. The camera can also run from its mains adapter, rated at 15 VDC, 2 A. It works between -10 °C and 50 °C at 10 % to 95 % relative humidity, without condensation. The IP54 enclosure survives a 2 m drop, and the camera weighs 0.885 kg with the battery fitted. It complies with IEC 61010-1 and IEC 61326-1, and the recommended calibration interval is two years.
Technical specifications
| Infrared resolution | 384 x 288 |
|---|---|
| IFOV | 1.91 mRad |
| Field of view | 42° x 30° |
| Min. focus distance | 0.15 m, manual focus |
| Thermal sensitivity | 40 mK |
| Measuring range | -20…550 °C (not calibrated below -10 °C) |
| Accuracy | ±2 °C or 2 %, whichever is greater |
| Spectral band | ~8-14 μm |
| Frame rate | 9 Hz or 27 Hz |
| Display | 3.5 inch, touchscreen, 640 x 480 |
| Visible light camera | 640 x 480 |
| Memory | ~500 images; SD from 4 GB (>1000 images) |
| Video | up to 5 min, standard and radiometric |
| Battery | lithium-ion, ≥3.5 h without Wi-Fi |
| Operating temperature | -10…50 °C |
| Protection | IP54, 2 m drop |
| Dimensions | 26.7 x 10.1 x 14.5 cm |
| Weight | 0.885 kg |
Part numbers
Show all part numbers (2)
TIS75+ 27HZ, FLK TiS75+ 9HZ
Request a price and lead time
TiS75+ thermal imaging camera, 384 x 288, up to 550 °C, Wi-Fi, 9 or 27 Hz. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the difference between the two TiS75+ versions?
The frame rate, which is 9 Hz or 27 Hz. All other specifications are the same.
How are images sorted by equipment?
The camera scans a QR code on the asset and files the thermograms against it automatically, so readings can be compared over time.
How long does the battery last?
At least 3.5 hours of continuous use without Wi-Fi, and a full charge takes up to 2.5 hours. The battery is replaceable.
Similar equipment from other manufacturers






