International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TEM Antenna broadband partial discharge sensor, 100 MHz to 3 GHz

The TEM Antenna picks up electromagnetic emissions from partial discharges in equipment under monitoring, such as medium voltage switchgear or low and medium voltage induction motors fed by converters. The passive sensor is mounted directly on the equipment.

Type
passive partial discharge sensor
Frequency band
100 MHz to 3 GHz
Gain
1.8 to 4.25 dBi
Typical VSWR
5:1

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Partial discharges within insulation are accompanied by electromagnetic radiation, which escapes through openings and radio-transparent areas of the enclosure. The TEM Antenna is placed beside such openings and passes its signal on to a partial discharge diagnostic system. It suits medium voltage switchgear, motors and almost any electrical equipment that has vents or radio-transparent surfaces.

The antenna is broadband with a flat amplitude-frequency response, so it works across a wide range of objects. Its working band of 100 MHz to 3 GHz covers the frequencies typical of partial discharge activity, and the design is tuned for maximum sensitivity and high gain. Gain runs from 1.8 to 4.25 dBi, the 3 dB beamwidth spans 100° to 210°, polarisation is linear and the typical VSWR is 5:1.

The sensor is passive and needs no power of its own, although optional devices such as a frequency converter are powered separately. It has a 50 Ω impedance and an N-type output connector. The compact housing measures 80 × 150 × 50 mm and weighs 250 g without the cable, and it tolerates relative humidity from 0 to 100%.

Objects suited to this sensor include generators, motors, variable frequency drives, PWM converter panels, switchgear, high voltage bushings, medium and high voltage power transformers, and measuring current and voltage transformers. The antenna is said to be compatible with the same diagnostic platform, and sensors of different types can be combined to suit a particular task.

Technical specifications

Typepassive partial discharge sensor
Frequency band100 MHz to 3 GHz
Gain1.8 to 4.25 dBi
Typical VSWR5:1
Beamwidth at 3 dB level100° to 210°
Polarisationlinear
Impedance50 Ω
ConnectorN type
Dimensions80 × 150 × 50 mm
Weight without cable250 g
Poweronly for optional devices
Installationnear openings in equipment enclosures
Relative humidity0 to 100%

Request a price and lead time

TEM Antenna broadband partial discharge sensor, 100 MHz to 3 GHz. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Where is the TEM Antenna installed?

Close to openings or radio-transparent areas of the equipment enclosure, such as medium voltage switchgear or a motor.

Does the sensor need a power supply?

No, the sensor is passive and only optional devices, such as a frequency converter, need power.

Which connector and impedance does the antenna have?

It has an N type connector and a 50 Ω impedance.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides