
TDR9100 Circuit Breaker Analyser with Motion, Resistor and Capacitance Measurement
TDR9100 measures the timing of main and auxiliary contacts, mechanism movement, analogue values, shunt resistor resistance and capacitance. It suits breakers of all types, from simple to complex checks in the field.
- Oil circuit breaker setup
- 3 contacts
- Extra high voltage setup
- 12 contacts, scaling to 36 in a group
- Sample rate
- up to 20 kHz
- Resolution
- 50 µs
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The analyser issues the open and close commands of the breaker and supports the operations O, C, O-0.3s-C, CO, O-CO, O-0.3s-CO, first trip and slow close. One unit tests breakers with 4 breaks per phase and provides 3 motion channels and 6 event channels. Two or three units can be grouped, doubling or tripling the number of channels and main contacts for breakers with 12 breaks per phase.
For oil circuit breakers a configuration with 3 contacts is provided, and for extra high voltage breakers a 12-contact configuration that scales to 36 when grouped. The sample rate reaches 20 kHz with a resolution of 50 µs. A recording lasts 25 s on all channels at maximum resolution, or up to 87 minutes at reduced resolution. The unit detects shunt resistors from 10 Ohm to 10 kOhm and measures their resistance from 10 to 7000 Ohm, and it measures capacitance from 75 to 10000 pF with an error of ± 10 %. The main contact inputs withstand ± 100 A and ± 300 V.
The analogue channels have an input impedance of 1 MOhm and 12-bit resolution, with ten ranges from 0.2 to 300 V and an accuracy of ± 1 % of reading and ± 1.5 % full-scale offset. The auxiliary contact channels work in voltage sense or contact sense mode, with an open circuit voltage of 30 V ± 10 % and a closed circuit current of 28 mA ± 10 %. All input groups are isolated from the chassis at 1.0 kV, and accuracy is not affected by substation interference.
Control is from a computer, tablet or universal controller, and reports are produced in spreadsheet, text and PDF formats. Digital linear and rotary motion sensors give early diagnosis of mechanical faults, and additional sensors from third-party manufacturers can be connected in the drive cabinet. The unit measures 60.9 × 39.4 × 21.6 cm, weighs 11 kg, runs from 100–240 V, 50/60 Hz, works from 0 to 50 °C, stores from -25 to +70 °C, and tolerates humidity up to 95 % without condensation.
Technical specifications
| Oil circuit breaker setup | 3 contacts |
|---|---|
| Extra high voltage setup | 12 contacts, scaling to 36 in a group |
| Sample rate | up to 20 kHz |
| Resolution | 50 µs |
| Recording time | 25 s (maximum resolution); up to 87 min (reduced) |
| Resistor detection | 10 Ohm to 10 kOhm |
| Resistor measurement | 10 to 7000 Ohm, ± 10 % |
| Capacitance measurement | 75 to 10000 pF, ± 10 % |
| Maximum input current | ± 100 A |
| Maximum input voltage | ± 300 V |
| Motion channels | 3, up to 9 in a group; 15-pin D connector |
| Event channels | 6, up to 18 in a group |
| Analogue channels | 1 MOhm, 12 bit, 0.2 to 300 V, ± 1 % of reading |
| Auxiliary contacts | 30 V ± 10 %, 28 mA ± 10 % |
| Isolation to chassis | 1.0 kV |
| Dimensions | 60.9 × 39.4 × 21.6 cm |
| Weight | 11 kg |
| Power supply | 100–240 V, 50/60 Hz |
| Operating temperature | 0 to 50 °C |
Part numbers
Show all part numbers (1)
TDR9100
Request a price and lead time
TDR9100 Circuit Breaker Analyser with Motion, Resistor and Capacitance Measurement. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How is a breaker with 12 breaks per phase tested?
Two or three TDR9100 units are grouped, giving up to 36 contacts, 9 motion channels and 18 event channels.
Does the analyser measure shunt resistors?
Yes. Resistors from 10 Ohm to 10 kOhm are detected, and their value is measured from 10 to 7000 Ohm with an accuracy of ± 10 %.
How long can a recording last?
25 s on all channels at maximum resolution, or up to 87 minutes at reduced resolution.
Similar equipment from other manufacturers






