
TCT-30 — transmitter for tracing current, feeder continuity and phasing, pulses up to 30 A
The TCT-30 supports continuity checks, confirming a continuous circuit between two locations along a feeder. It also helps identify phasing in manholes and vaults, using pulsed current of up to 30 A.
- Purpose
- Feeder continuity testing and phasing
- Pulse current
- up to 30 A
- Switching
- Solid state
- Signal
- A separate pulse sequence for each phase
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The transmitter is part of the equipment used to test power cables in underground networks and at substations. During a check, it is connected to a feeder at one end, while an operator at another point along the route detects the passage of current. This confirms that a cable found in a manhole or vault really belongs to the intended feeder and has a continuous path between the two points.
A separate pulse sequence is produced for each phase. By comparing these sequences at the manhole, the operator tells the phases apart and establishes phasing without disconnecting any joints. The pulse amplitude reaches up to 30 A.
Switching inside the unit is solid state, so there are no mechanical contacts in the power circuit. This makes the transmitter suitable for long cable runs, where enough current is needed to give a clear signal at the remote point.
For receiving the signal, the TCT-30 is used with GALV galvanometers and PMT testers. The GALV-1B measures current by the deflection of a moving coil or magnet, while the PMT-1 is intended for working with metallic cable sheaths. The GALV-STK telescopic pole is used to position small and large search coils on the cable.
Within the same range of cable network equipment is the combined TCT/AC-30SG, which houses a tracing current transmitter, a feeder short-circuit check unit and a spark gap in one enclosure. The AC-5 is available separately for checking a feeder for short circuits and applied earthing, and the SG-6 spark gap is used with it.
Technical specifications
| Purpose | Feeder continuity testing and phasing |
|---|---|
| Pulse current | up to 30 A |
| Switching | Solid state |
| Signal | A separate pulse sequence for each phase |
| Cable length | Suitable for long cables |
| Compatible receivers | GALV galvanometers, PMT testers |
| Accessories | GALV-STK telescopic pole for search coils |
Request a price and lead time
TCT-30 — transmitter for tracing current, feeder continuity and phasing, pulses up to 30 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How does the TCT-30 help identify the phase of a cable in a manhole?
For each phase the unit produces its own pulse sequence of current up to 30 A, which the operator distinguishes with a receiver.
Which receivers work with the transmitter?
GALV galvanometers, including the GALV-1B, and PMT testers, including the PMT-1 for metallic cable sheaths.
Is the TCT-30 suitable for long cable runs?
Yes. It is suitable for long cables, and its switching is solid state.
Similar equipment from other manufacturers






